Meritor Part
Meritor 17N47771X End Yoke
Description
Additional information
| Asin | B07PNJMCJL |
|---|---|
| Dimensions | |
| Weight | 13.88 pounds |
| Manufacturer | Meritor Genuine |
Reviews (0)
Be the first to review “Meritor 17N47771X End Yoke”
Related products
Agricultural & Construction Machinery
Neapco 12-2300 PTO QD Yoke
12-2300 Power Take Off Quick Disconnect Yoke
Part Number 12-2300
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.000-15 Involute Spline
Bore Type: Splined
Center Line To End Of Hub (In): 3.500
Driveline Series: 1200
Hub Diameter (In): 1.500
Set Screw Location: GAP
Set Screw Thread Size (In)(Mm): (2) 0.377 (QD Ball Hole)
Agricultural & Construction Machinery
Weasler 10001248 Yoke and Shaft Assembly
12 Series Yoke And Shaft
12 series yoke and shaft, 1 x 1 1/8 rectangle
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.
Agricultural & Construction Machinery
Weasler 110-5520 Yoke
55 Series Auto-Lok Yoke
55 series yoke with 1 3/4-20 spline bore and auto-lok connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.- Fits Series 55N: U-Joint Cap Size: 1-17/32” / 1.531” Cap to Cap: 4-5/16” / 4.313”.
- 110 5520, 10-5520, 1105520, 971-1105520, 9711105520, PM110-5520
- 55N Series
- PTO
Agricultural & Construction Machinery
Moog 1397 Yoke
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.- Machined Bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash Lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
Agricultural & Construction Machinery
Neapco 12-1197 Power Take Off End Yoke
12-1197 Power Take Off End Yoke
Part Number 12-1197
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.000 X 1.125 Rectangle
Bore Type: Rectangular
Center Line To End Of Hub (In): 3.500
Driveline Series: 1200
End Of Hub To Set Screw (In): 1.000
Set Screw Location: GAP
Set Screw Thread Size (In)(Mm): 0.390 (Pin)
Automotive
Neapco 56-2600 Power Take Off Retainer
56-2600 Power Take Off Retainer
Description: Contains (2) WPB8-26 Retainers, 2600 Series, 2.868" ID
Quantity: 2
Agricultural & Construction Machinery
Weasler 102-1206 Yoke
12 series yoke with 1 3/8-6 spline bore and quick disconnect connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.
Automotive
Neapco N2-4-JK02 Driveshaft End Yoke
N2-4-JK02 Driveshaft End Yoke - Conversion
Bore Type: Splined
Center Line Uj To End Of Hub (In): 3.000
Driveline Series: 1310HR
Hub Diameter (In): 1.875
Joint Angle (Degrees): 22.000
Length Thru Hole(In): 1.500
Spline Od(In)/No. Teeth: 1.250-24
Uj Retention: U-Bolt
Agricultural & Construction Machinery
Weasler 101-7620 Yoke
AW35 series yoke with 1 3/4-20 spline bore and safety slide lock connection
Automotive
Neapco N3-3-1502KX Slip Yoke
N3-3-1502KX Driveshaft Slip Yoke
Center Line Uj To End Of Spline (In): 7.310
Center Line Uj To Face Of Washer(In): 1.240
Driveline Series: 1350
Dust Cap: 280195
Joint Angle (Degrees): 20.000
Lube Fitting Part Number: 0641-B
Spline Od(In)/No. Teeth: 1.375-16
Agricultural & Construction Machinery
Neapco 22-2312 PTO Quick Disconnect Yoke
22-2312 Power Take Off Quick Disconnect Yoke
Part Number 22-2312
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-6B Spline
Bore Type: Splined
Center Line To End Of Hub (In): 4.810
Driveline Series: 2200
End Of Hub To Set Screw (In): 1.000
Hub Diameter (In): 2.280
Set Screw Location: Gap
Set Screw Thread Size (In)(Mm): 0.560
Yokes
- Fits 1310 Series U-Joints (3 1/4" Wide, 1 1/16" Cap Diameter)
- For 1310 Series Double Cardan CV Driveshafts
- Center to Center of U-Joints: 2.69"
- Interchangeable with Spicer 2-26-497 H Yoke
Agricultural & Construction Machinery
Weasler 800-4428 Yoke
44 Series Setscrew Yoke
44 series yoke with round with keyway bore and setscrew connection
PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.- Fits Series 44N: U-Joint Cap Size: 1-5/16” / 1.313” Cap to Cap: 4” / 4.000”.
- 2660800-4432, 800 4432, 800-4432, 8004432, 971-8004432, 9718004432, PM800-4432
- 44N Series
- PTO
Agricultural & Construction Machinery
Neapco 22-2317 PTO QD Yoke
22-2317 Power Take Off Quick Disconnect Yoke
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-21 Involute Spline
Bore Type: Splined
Center Line To End Of Hub (In): 4.810
Driveline Series: 2200
End Of Hub To Set Screw (In): 1.000
Hub Diameter (In): 2.280
Set Screw Location: Gap
Set Screw Thread Size (In)(Mm): 0.560
Neapco 8-2420 PTO End Yoke
8-2420 Power Take Off End Yoke
Part Number 8-2420
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.891 Outer Profile
Bore Type: Outer Tube Profile
Center Line To End Of Hub (In): 3.781
Driveline Series: W2400
Agricultural & Construction Machinery
Reviews
There are no reviews yet.