Meritor Part
Meritor 155N28307 Driveline Weld Yoke
- VMRS Code: 024-002-057
Description
Additional information
| Asin | B07PQT39SR |
|---|---|
| Dimensions | |
| Weight | 4.9 pounds |
| Manufacturer | Meritor |
Reviews (0)
Be the first to review “Meritor 155N28307 Driveline Weld Yoke”
Related products
Automotive
Neapco 56-2600 Power Take Off Retainer
56-2600 Power Take Off Retainer
Description: Contains (2) WPB8-26 Retainers, 2600 Series, 2.868" ID
Quantity: 2
Agricultural & Construction Machinery
Weasler 200-6580 - 102-6506 U-Joint Kit and Tractor Yoke
AB5 series cross and bearing kit, p standard, center grease fitting - AB5 Series Cross And Bearing Kit
AB5 series yoke with 1 3/8-6 spline bore and quick disconnect connection - AB5 Series Quick Disconnect Yoke
Agricultural & Construction Machinery
Neapco 8-2012 PTO Quick Disconnect Yoke
8-2012 Power Take Off Quick Disconnect Yoke
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-6 Spline
Bore Type: Splined
Center Line To End Of Hub (In): 3.812
Driveline Series: W2200
Spline Od(In)/No. Teeth: 1.375-6
Agricultural & Construction Machinery
Weasler 10001248 Yoke and Shaft Assembly
12 Series Yoke And Shaft
12 series yoke and shaft, 1 x 1 1/8 rectangle
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.
Agricultural & Construction Machinery
Neapco 12-1197 Power Take Off End Yoke
12-1197 Power Take Off End Yoke
Part Number 12-1197
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.000 X 1.125 Rectangle
Bore Type: Rectangular
Center Line To End Of Hub (In): 3.500
Driveline Series: 1200
End Of Hub To Set Screw (In): 1.000
Set Screw Location: GAP
Set Screw Thread Size (In)(Mm): 0.390 (Pin)
Agricultural & Construction Machinery
Weasler 800-4424 Yoke
44 Series Setscrew Yoke
44 series yoke with round with keyway bore and setscrew connection
PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.
Agricultural & Construction Machinery
Moog 1397 Yoke
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.- Machined Bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash Lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
Agricultural & Construction Machinery
Weasler 102-1206 Yoke
12 series yoke with 1 3/8-6 spline bore and quick disconnect connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.
Agricultural & Construction Machinery
Neapco 22-2317 PTO QD Yoke
22-2317 Power Take Off Quick Disconnect Yoke
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-21 Involute Spline
Bore Type: Splined
Center Line To End Of Hub (In): 4.810
Driveline Series: 2200
End Of Hub To Set Screw (In): 1.000
Hub Diameter (In): 2.280
Set Screw Location: Gap
Set Screw Thread Size (In)(Mm): 0.560
Automotive
Neapco N3-3-1502KX Slip Yoke
N3-3-1502KX Driveshaft Slip Yoke
Center Line Uj To End Of Spline (In): 7.310
Center Line Uj To Face Of Washer(In): 1.240
Driveline Series: 1350
Dust Cap: 280195
Joint Angle (Degrees): 20.000
Lube Fitting Part Number: 0641-B
Spline Od(In)/No. Teeth: 1.375-16
Automotive
Spicer 211342X Socket Yoke Assembly
DOUBLE CARDAN CV DRIVESHAFT CENTERING YOKE- Fits 1984 BRONCO II with 1210 series yoke style rear output on transfer case
- Fits 1983 to 1985 RANGER 4X4 with 1210 series yoke style rear output on transfer case
- 1210 series
- 2.438 inches between Locating Tabs
- 1.062 inch bearing caps
- Outside Snap Rings Style
- Greaseable
Agricultural & Construction Machinery
Weasler 102-3506 Yoke
35 series yoke with 1 3/8-6 spline bore and quick disconnect connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.
Agricultural & Construction Machinery
Weasler 10001448 Yoke
14 series yoke and shaft, 1 x 1 1/8 square
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.
Automotive
Neapco N2-4-JK02 Driveshaft End Yoke
N2-4-JK02 Driveshaft End Yoke - Conversion
Bore Type: Splined
Center Line Uj To End Of Hub (In): 3.000
Driveline Series: 1310HR
Hub Diameter (In): 1.875
Joint Angle (Degrees): 22.000
Length Thru Hole(In): 1.500
Spline Od(In)/No. Teeth: 1.250-24
Uj Retention: U-Bolt
Agricultural & Construction Machinery
Weasler 102-1406 Yoke
14 series yoke with 1 3/8-6 spline bore and quick disconnect connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.
Agricultural & Construction Machinery
Weasler 700-6443 Yoke
AB4 series yoke with 43 mm trilobe bore and roll pin connection
Shaft yokes (or inner profile yokes) connect the cross and bearing kits to the telescoping shaft or inner tube. Tube yokes (or outer profile yokes), connect the other cross and bearing kits to the opposite side of the telescoping shaft or outer tube. Weasler provides both domestic (North American) and Weasler Profile metric shaft and tube yoke connection options. Domestic yokes are provided as square, rectangle, hexagon or splined in shape. Weasler Profile metric yokes are provided as lemon, star, or trilobe in shape.
Agricultural & Construction Machinery
Weasler 200-8474 and 102-8406 kit
- Fits Series 4: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 74.6 MM / 2-15/16” (2.937). Fits Series 2300/210: U-Joint Cap Size: 27.0 MM 1-1/16” (1.063) / Cap to Cap: 74.6 MM / 2-15/16” (2.937).
- 200-8474, 102-8406
- Bondioli/Pavesi 4 & Walterscheid 2300/210 Series
- PTO
Reviews
There are no reviews yet.