Lovejoy U-75S Shaft-to-Shaft Uniflex 3/8 In Coupling

Name: Lovejoy U-75S Shaft-to-Shaft Uniflex 3/8 In Coupling - Twin Spring Coupling - Expert Coupling Selection | Best Prices via Amazon & eBay
SKU: B004S2T5R0

SKU: B004S2T5R0 Categories: Agricultural couplings, Couplings, Collars & Universal Joiners, Industrial Tags: lovejoy, spring coupling

Description

Lovejoy U-75S Shaft-to-Shaft Uniflex 3/8 In Coupling

68514413359 Dimensional Data

Bore Size	3/8 x 3/8 in
Hub Size	U75S
Set Screw Thread Size (Dimension T)	1/4-20
Keyway Size (W x D)	No Keyway
Dimension HD	1.420 in36.07 mm
Overall Length	2.720 in69.09 mm
Pin Location (Dimension SL)	0.41 in
Length thru Bore	0.840 in21.34 mm
Min. Bore (Dimensions ID1/ID2)	0.375 in10.00 mm
Max. Bore (Dimensions ID1/ID2)	0.750 in19.05 mm
Bore Dia. [Max]	0.750 in19.00 mm
Cubic inches	5.48461 in³

Performance Data

Operating Temperature Range	-40 to 250 ºF
Max. Torque	175 in·lb
Max. Speed	20000.00 rpm
Axial Misalignment (∆ Ka)	0.020 in0.51 mm
Max. Parallel Misalignment	0.019 in0.48 mm
Wind-Up Angle at Nominal Torque	1.12 º
Wind-Up Angle at Max. Torque	3.00 º
Rated HP at 100 rpm	0.28 hp
# of Set Screws Required per Hub	1

Coupling Design

Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design

The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.

Notes

Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.
OAL Tolerance: + 1/8 inch.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other.

Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts.

Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another.

Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives, and other transmission and mechanical power products.

The company, founded in 1900, is headquartered in Downers Grove, IL.