Lovejoy RRU-50 Drop-Out Style Uniflex Coupling Hub 3/8 In Bore BE No Kw

68514444208, RRU Type Hubs without Keyway – Inch (Imperial) Bores

Dimensional Data

Bore Size	3/8 in
Coupling	RRU50
Set Screw Thread Size (Dimension T)	1/4-20
Keyway Size (W x D)	No Keyway
Overall Length	3.520 in 89.41 mm
Min. Bore (Dimensions ID1/ID2)	0.375 in 9.53 mm
Max. Bore (Dimensions ID1/ID2)	1.000 in 25.40 mm
Dimension BC	1.500 in 38.10 mm
Dimension D	1.880 in 47.75 mm
Dimension FD	2.000 in 50.80 mm
Dimension FL1	0.250 in 6.35 mm
Dimension HD	2.000 in 50.80 mm
Dimension HL	1.000 in 25.40 mm
Dimension S	1.560 in 39.62 mm
Pin Location (Dimension SL)	0.500 in
Pin Size	1/8 in
Cubic inches	4.00000 in³

Performance Data

Max. Torque	82.00 in·lb
Max. Speed	30000.00 rpm
Max. Recommended End Play	0.035 in 0.89 mm
Max. Parallel Offset	0.021 in 0.53 mm
Max. Angular Offset	4.50 º
Wind-Up Angle at Max. Torque	1.82 º
Rated HP at 100 rpm	0.13 hp
# of Set Screws Required per Hub	1
Max. Torque	82 in·lb

Coupling Design

Coupling Design

Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.

Lovejoy RRU-50 Drop-Out Style Uniflex Coupling Hub 3/8 In Bore BE No Kw

 

This Lovejoy RRU steel coupling hub can be fastened with cap screws to both ends of a Uniflex double flange coupling for connecting rotating shafts and providing low backlash/windup. The hub has a quick disconnect design to meet drop out requirements.

This hub is made of steel for strength and durability, has a finished bore that fits onto shaft without the need for machining, and requires no lubrication. It is resistant to oil, grease, dirt, and most industrial chemicals.

This hub can be used with couplings suitable for applications such as printing and binding registration, robotics/positioning, conveyors, machine tools, centrifugal pumps, agricultural machinery, blowers, winding machines, and steering mechanisms.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other.

Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts.

Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another.

Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives, and other transmission and mechanical power products.

The company, founded in 1900, is headquartered in Downers Grove, IL.

Lovejoy RRU-50 Drop-Out Style Uniflex Coupling Hub 3/8 In Bore BE No Kw

Asin	B004S2SYX6