Lovejoy L276 Standard Jaw Coupling Hub Iron 1 1/4 In Bore w Kw

68514476591, L Type Hubs with Keyway – Inch (Imperial) Bores

Dimensional Data

Bore Size	1 1/4 in
Coupling Size	L276
Keyway Size (W x D)	1/2 x 1/4 in
Length thru Bore	3.120 in 79.25 mm
Overall Length	7.820 in 198.63 mm
Outside Diameter	6.18 in 156.97 mm
Min. Bore (Dimensions ID1/ID2)	0.875 in 22.00 mm
Max. Bore (Dimensions ID1/ID2)	2.875 in 73 mm
Hub Length	4.700 in 119.38 mm
Dimension G	1.580 in 40.13 mm
Dimension SL	1.560 in 39.62 mm
Dimension T	1/2-13
Cubic inches	179.50428 in³

Performance Data

Nominal Torque	4716 in·lb
Max. Speed	1800 rpm
Rated HP at 100 rpm	7.5 hp
Rated HP at 1,200 rpm	90 hp
Rated HP at 1,800 rpm	135 hp

Spider Performance

Spider Performance

Nitrile Butadiene (Buna N) Rubber is a flexible elastomer material that is oil resistant, resembles natural rubber in resilience and elasticity and operates effectively in temperature range of -40° to 212° F (-40° to 100° C). Good resistance to oil. Standard elastomer. (Also applies to SXB Cushions.)

Features

Features

Fail-safe – will still perform if elastomer fails No metal to metal contact Resistant to oil, dirt, sand, moisture and grease More than 850,000 combinations of bore sizes Most types available from stock in 24 hours

 

Lovejoy L276 Standard Jaw Coupling Hub Iron 1 1/4 In Bore w Kw

 

This Lovejoy standard jaw coupling hub replaces hubs on Lovejoy L type jaw style flexible couplings and is made of cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not.

This hub transfers shock and misalignment from the shaft to the center element of the coupling assembly for reduced wear on the shaft assembly.

Lovejoy jaw style couplings are suitable for use in various industrial power transmission applications such as compressors, blowers, pumps, conveyors, mixers, and gear boxes, among others.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other.

Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts.

Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another.

Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products.

Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut für Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance.

The company, founded in 1900, is based in Downers Grove, IL.

 

Lovejoy L276 Standard Jaw Coupling Hub Iron 1 1/4 In Bore w Kw

Asin	B004QWZUTO