Lovejoy F 1S Accessory Kit for Sier-Bath Flanged Sleeve Gear Coupling

SKU: B004QX004I Categories: Gear & Sleeve, Couplings, Collars & Universal Joiners, Flexible Couplings, Industrial, Multi-Flex Tags: 1S-FLNG CP ACCY KIT, 69790400147, gear, Industrial, Lovejoy F 1S Accessory Kit for Sier-Bath Flanged Sleeve Gear Coupling Brand: Lovejoy

Description

Lovejoy F 1S Accessory Kit for Sier-Bath Flanged Sleeve Gear Coupling.

Lovejoy 69790400147 F 1S Accessory Kit for Sier-Bath Flanged Sleeve Gear Coupling, Carbon Steel, Inch, 6000 Maximum Unbalanced RPM, 7600 in-lbs Nominal Torque.

Dimensional Data

Width	8.000 in
Depth	1.00 in
Height	6.000 in
Cubic inches	48.00000 in³

Features

Patented Vari-Crown® tooth form for long coupling life
Precision cut 20° pressure angle gear teeth with minimum backlash
All steel sleeves and hubs (stainless steel available)
Designs for applications requiring horizontal and vertical orientation
Most standard configurations are available as stock items
Angular misalignment of 1-1/2° per gear mesh (flex-plane) up to size 5.5, 3/4° for sizes 6 and above
Coupling sizes available through size 30 to accommodate bore sizes up to and including 44 inches
Interference fit (standard) and Clearance fit on bores are available
Load capacities range from 7,600 in-lbs up to 47,269,000 in-lbs
Exposed bolts standard on all sizes, shrouded available by request up to size 6
Standard bolts supplied by Lovejoy are treated to be corrosion resistant
Flanged sleeve couplings are interchangeable with industry standards
Piloted gear fit for higher speeds and less vibration
Labyrinth all steel seal design in FL series
Inch and Metric bore sizes available

This Lovejoy F Type accessory kit consists of the gasket, bolts, and nuts for a specific Sier-Bath flanged sleeve gear coupling (not included), and is suitable for assembling that coupling. The paper gasket fits between the flanged sleeves to help retain the coupling lubricant. The steel bolts and nuts clamp the flanged sleeves together for a friction fit, and are heat treated for tensile strength and coated for corrosion resistance.

Gear couplings, a type of flexible coupling, use gear teeth on hubs and sleeves to transmit torque and offset rotational misalignment, and are suitable for use in applications involving extended distances between shaft ends, such as metal rolling mills and paper mills.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts.

Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives, and other transmission and mechanical power products. The company, founded in 1900, is headquartered in Downers Grove, IL.