Lovejoy DD2 Double Universal Joint Solid Bore
Lovejoy 68514417005 DD2 Double Universal Joint, Solid Bore, 0.50″ Outer Diameter, 4.00″ Overall Length.
Dimensional Data
Std Bore | 1/4 in |
Size | DD2 |
Set Screw Size | No Setscrew |
Outside Diameter | 0.500 in |
Overall Length | 4.00 in |
Bore Depth (Dimension C) | 0.620 in |
Max. Bore – No Keyway (Dim. ID1 & ID2) | 0.380 in 9 mm |
Main Pin Height (Dimension E) | 1.000 in |
Dimension F (Standard) | 2.000 in 50.80 mm |
Dimension F (Minimum) | 1.380 in 35.05 mm |
Cubic inches | 1.00000 in³ |
Performance Data
Operating Temperature Range | -20 to 212 ºF |
Static Breaking Torque | 378.00 in·lb |
Max. Speed | 1750.00 rpm |
Static Breaking Torque | 378.00 in-lb |
Max. Angle Offset | 25.00 º |
This Lovejoy DD-Type universal joint is a double pin and block u-joint for connecting two rotating shafts with angles up to 90 degrees and speeds up to 1,750 rpm. It compensates for angular misalignment and shaft separation and has a double joint configuration, providing two points of flexion to help minimize speed fluctuations and torsional vibration during operation.
The hubs, center block, and pins are made of steel for strength and durability. It has solid bore hubs for specific machining and a groove on each end for attaching a boot with a retaining ring. This universal joint provides a uniform speed ratio between driving and driven shafts, and is suitable for applications requiring moderate torque transmission, such as farm implements, material handling equipment, and drive shafts.
