Lovejoy CJ110 Polyurethane Spider 95A Red

Name: Lovejoy CJ110 Polyurethane Spider 95A Red - Twin Spring Coupling - Expert Coupling Selection | Best Prices via Amazon & eBay
SKU: B00Y2PHUBG

SKU: B00Y2PHUBG Categories: Agricultural couplings, Couplings, Industrial, Insert, Jaw Couplings, Spider Tags: curved jaw, insert, lovejoy, polyurethane, spider Brand: Lovejoy

Description

Lovejoy CJ110 Polyurethane Spider 95A Red

Lovejoy 68514462079 Polyurethane 110 Spider, Curved Jaw, 10.04″ OD, 1.65″ Thick, 95A Red.

Dimensional Data

Spider Size	110
Set Screw Size	5/8-11
Set Screw Style Coupling Location Size (Dimension SL)	1.380 in 35.05 mm
Outside Diameter	10.040 in 255.00 mm
Spider Outside Diameter (Dimension A)	10.040 in 255.00 mm
Spider Inside Diameter (Dimension H)	5.000 in 127.00 mm
Spider Thickness (Dimension W)	1.650 in 42.00 mm
Dimension G	2.170 in 55.12 mm
Dimension S	4.060 in 103.12 mm
Distance between Spider and Hub Face (Dimension CL)	0.260 in 6.60 mm
Cubic inches	166.32264 in³

Performance Data

Normal Temperature Range	-40 to 212 ºF
Max. Temperature Range	-40 to 248 ºF
Nominal Torque	63720.00 in·lb 7199.00 N·m
Max. Torque	127440.00 in·lb 14398.00 N·m
Max. Speed	2240.00 rpm
Angular Displacement	0.220 in
Max. Angular Displacement (∆ Ka), n=1500 [1/min]	1.30 º
Max. Axial Displacement (∆ Ka)	0.1650 in
Max. Radial Displacement (∆ Kr)	0.0210 in
Axial Misalignment	0.039 to 252 in
Angular Misalignment	0.90 to 1.30 º
Parallel Misalignment	0.008 to 0.027 in
Wind-Up Angle at Nominal Torque	3.20 º
Wind-Up Angle at Max. Torque	5.00 º
Rated HP at 1,200 rpm	1280.00 hp
Rated HP at 1,800 rpm	1820.00 hp

The Curved Jaw Design

Three piece design that is easy to assemble.
The curved jaw design incorporates both radial and axial curvature (crowning) to the elastomer (spider).
Hubs are offered in sintered iron, steel, aluminum, cast iron and nodular iron materials.
Three different urethane elastomers available.
No metal to metal contact and no lubrication required.
Fail safe design due to the jaw in compression design (continues to function after the elastomer fails).
The CJ series covers a torque range of 67 to 247,800 in-lbs.

Elastomer Characteristic

Four types of spiders are available for the CJ Series of couplings.
Urethane spiders provide high abrasion resistance and elasticity, along with good damping characteristics.
The spiders are offered in a variety of shore hard nesses, each providing a different level of torque capacity, damping, and chemical resistance.
The 92A shore insert (yellow in color) is the standard, offering excellent torque carrying capacity.
The 80A shore insert (blue) offers the best damping characteristics.
The 95/98A shore spider (red) offers higher torque than the standard 92 shore, but retains greater damping capacity compared to the 64D shore insert (green).
The 64D shore insert is offered for high humidity environments, higher temperatures, and offers the highest torque capacity.
The standard curved jaw spider design has a hole in the center to accommodate small between shaft end measurements.
The 80A, 92A, and 95/98A shore spiders have a temperature capacity of 212° F.
The 64D shore spider has a temperature capacity of 230° F.
The curved jaw spider’s urethane material also resists oil, dirt, sand, grease, moisture, many solvents, as well as atmospheric effects of ozone.

Application Types Requiring

High Torque Requirements.

Notes

Maximum bore may be achieved through the use of a shallow keyway.
Maximum bore refers to maximum straight bore with keyway allowed in hub.
Outside Diameter is equal to Dimension HD for B style aluminum sizes: 19, 24, and 28.
S = Solid hub with no bore.
Spider Outside Diameter (Dimension A) is equal to Outside Diameter.
The values regarding displacement are provided assuming normal operating conditions (i.e. temperature, torque with nominal rating of the coupling, speed/ RPM rating of the coupling, and misalignment).
Careful installation (i.e. alignment) and periodic inspection should be provided to provide the optimum life of the coupling. Special consideration should be given as to the position of the shafts and the amount of axial movement the coupling will be exposed to.
The more accurate the alignment of the coupling, will result in greater life of the elastomer. A coupling guard and rotating equipment safety procedures should always be followed.

Lovejoy CJ110 Polyurethane Spider 95A Red