Lovejoy 1020 Grid Spacer Coupling Spacer Hub 1 5/8 In
Lovejoy 69790406281 Size 1020 Grid Spacer Coupling Spacer Hub, Includes Hardware, Inch, 1.625″ Spacer, 422 in-lbs Nominal Torque, 3600 rpm Max Rotational Speed.
Dimensional Data
Set Screw Style Coupling Size (Dimension T) | 8-32 |
Set Screw Style Coupling Location Size (Dimension SL) | 0.500 in 12.70 mm |
Length thru Bore | 1.620 in 41.15 mm |
Outside Diameter | 4.000 in 101.60 mm |
Min. Bore (Dimensions ID1/ID2) | Solid |
Max. Bore (Dimensions ID1/ID2) | 1.380 in 35.00 mm |
Dimension FD | 3.380 in 85.85 mm |
Dimension G | 0.190 in 4.826 mm |
Spacer Hub Length (Dimension S) | 1.625 in 41.28 mm |
Distance between Shaft Ends (Application Shaft Separation) | 1.781 in 45.24 mm |
Cubic inches | 18.56465 in³ |
Performance Data
Lovejoy® Grid Coupling Size | 1020 |
Nominal Torque | 460.00 in·lb 48.00 N·m |
Max. Speed | 3600.00 rpm |
Max. Parallel Misalignment at Installation (Dimension P) | 0.0060 in |
Max. Parallel Misalignment during Operation (Dimension P) | 0.012 in |
Distance between Shaft Ends (Dimension G) – Normal Gap | 0.118 in 3.00 mm |
Max. Angular Misalignment at Installation (X-Y) | 0.002 in |
Max. Angular Misalignment during Operation (X-Y) | 0.009 in |
Coupling Part Numbers
Falk™ Steelflex® Horizontal Cover Style Coupling Part Number | 1020T10 |
Morse® / Browning® Grid-Flex Horizontal Cover Style Coupling Part Number | GF2020H |
Dodge® Grid-Lign® Horizontal Cover Style Coupling Part Number | 1020T10 |
Kop-Flex® / Kop-Grid® Horizontal Cover Style Coupling Part Number | 1020H |
Falk™ Steelflex® Vertical Cover Style Coupling Part Number | 1020T20 |
Morse® / Browning® Grid-Flex Vertical Cover Style Coupling Part Number | GF2020V |
Dodge® Grid-Lign® Vertical Cover Style Coupling Part Number | 1020T20 |
Kop-Flex® / Kop-Grid® Vertical Cover Style Coupling Part Number | 1020V |
This Lovejoy 1000 series grid coupling assembly spacer hub with hardware replaces worn spacer hubs on existing Lovejoy 1000 series style grid couplings and is made of lightweight, die-cast aluminum to resist corrosion and tarnishing.
Grid couplings, a type of flexible coupling, use a flexible grid that fits into slotted hubs to transmit torque and offset rotational misalignment.
The serpentine shape of the grid absorbs impact energy, reduces vibration, and transmits torque from one hub to the other through the grid.
This grid is suitable for horizontal-style coupling designs and uses imperial unit measurements for industry consistency and interchangeability.
It has an operating temperature range of -40 to 250 degrees F (-40 to 121 degrees C). Together with the other component parts of the coupling assembly, the grid supports constant angular misalignments up to 0.25 degrees.
It meets International Organization for Standardization (ISO) 9001 for quality assurance.
Lovejoy 1000 series grid couplings are suitable for use in various industrial power transmission applications such as pumps, mixers, crushers, fans, compressors, conveyors, pulverizers, and other equipment found in the steel, pulp, paper, mining, aggregate, and construction industries.
Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other.
Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts.
Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another.
Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.
Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products.
Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut für Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance.
The company, founded in 1900, is based in Downers Grove, IL.
