Showing 1–12 of 246 results

Replace Jaw and Uni joints from Mining equipment
No spider inserts or bearings to maintain and replace
One piece design means longer life

Belden UJ-HD1000x00 KIT

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models.
All components are heat treated, precision machined and ground to close tolerances.
The Heavy Duty universal joint provides exceptional service life in the most demanding applications.
All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
450 [50]  2250 [254]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1" 0.995 [25.27] n/a 3.375 [85.7] 1.688 [42.9] 1.19 [30.2] n/a n/a
 

Belden UJ-HD1000x500K

   

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
450 [50]  2250 [254]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1" 0.995 [25.27] 0.5000 [12.700] 3.375 [85.7] 1.688 [42.9] 1.19 [30.2] 1/8 x 1/16 Yes
 

Belden UJ-HD1125x00 KIT 

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
  Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
650 [73]  3250 [367]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/8" 1.120 [28.45] n/a 3.500 [88.9] 1.750 [44.5] 1.20 [30.4] n/a n/a
 

Belden UJ-HD1125x563K 

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
  Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
650 [73]  3250 [367]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/8" 1.120 [28.45] 0.5625 [14.288] 3.500 [88.9] 1.750 [44.5] 1.20 [30.4] 1/8 x 1/16 Yes
 

Belden UJ-HD1250x00 

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
1040 [117]  5200 [587]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/4" 1.245 [31.62] n/a 3.750 [95.3] 1.875 [47.6] 1.25 [31.8] n/a n/a
 

Belden UJ-HD1250x00 KIT

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
  Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
1040 [117]  5200 [587]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/4" 1.245 [31.62] n/a 3.750 [95.3] 1.875 [47.6] 1.25 [31.8] n/a n/a
 

Belden UJ-HD1250x625

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances.
The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/4" 1.245 [31.62] 0.6250 [15.875] 3.750 [95.3] 1.875 [47.6] 1.25 [31.8] n/a n/a
 

Belden UJ-HD1250x625K

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
1040 [117]  5200 [587]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/4" 1.245 [31.62] 0.6250 [15.875] 3.750 [95.3] 1.875 [47.6] 1.25 [31.8] 3/16 x 3/32 Yes
 

Belden UJ-HD1500x00

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
2000 [226] 10000 [1129]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/2" 1.495 [37.97] n/a 4.250 [108.0] 2.125 [54.0] 1.40 [35.6] n/a n/a
 

Agricultural & Construction Machinery

Belden UJ-HD1500x00 KIT

Belden UJ-HD1500x00 KIT

 

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
2000 [226]  10000 [1129]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/2" 1.495 [37.97] n/a 4.250 [108.0] 2.125 [54.0] 1.40 [35.6] n/a n/a
 

Agricultural & Construction Machinery

Belden UJ-HD1500x750

Belden UJ-HD1500x750

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
 
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
  Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
2000 [226]  10000 [1129]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/2" 1.495 [37.97] 0.7500 [19.050] 4.250 [108.0] 2.125 [54.0] 1.40 [35.6] n/a n/a
 

Agricultural & Construction Machinery

Belden UJ-HD1500x750K

Belden UJ-HD1500x750K

HEAVY DUTY SINGLE UNIVERSAL JOINTS

The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
Features
  • High grade-alloy steel
  • Maximum operating angles up to 45° (Special design options with higher angles may be available)
  • Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m]                   Ultimate Torque Lb-in [N-m]
2000 [226] 10000 [1129]
O.D Nominal (in) O.D in [mm] Inside Bore in [mm] O.Length in [mm] Yoke Length in [mm] Hub Length / Bore Depth in [mm] Keyway [in] S.Steel
1-1/2" 1.495 [37.97] 0.7500 [19.050] 4.250 [108.0] 2.125 [54.0] 1.40 [35.6] 3/16 x 3/32 Yes