Couplings
1120T10 G-Flex Horizontal Cover Kit
1120T10CK
TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.
Couplings
1130T20 G-Flex Vertical Cover Kit
1130T20CK
TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.
Couplings
1140T10 G-Flex Horizontal Cover Kit
1140T10CK
TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.
Couplings
1140T20 G-Flex Vertical Cover Kit
1140T20CK
TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.
Agricultural & Construction Machinery
2 of Weasler 200-1400 14 Series Cross And Bearing Kit
- R-Kits are standard and offer a high-quality lube cycle of 8 hours which is acceptable for many applications. R-kits and E-kits are interchangeable for all available Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with R-kits can still be upgraded to E-kits or M-kits. Lubrication cycle of up to 8 hours. A black seal with grease fitting makes it fast and easy to find a P-Kit.
- 012014, 0161021, 1090500M91, 1090501M91, 1090529M1, 1240, 129437IMP, 136908, 139, 14N, 14R, 14R/GN, 14RIMP, 15P405, 200 1400, 200-1400, 2000, 2001400, 200464C91, 2075X, 221613, 261-014, 261014, 302-1400, 3021400, 339-14, 33914, 971-2001400, 9712001400, CBA140, L14N, PM200-1400, R14N/140
- 14N Series
- PTO
Agricultural & Construction Machinery
2 of Weasler 200-5500 Cross & Bearing Kit
55 series cross and bearing kit, r standard, center grease fitting
PERFORMANCE BENEFITS
Lubrication cycle of up to 8 hours.
Interchangeable with standard North American cross and bearing kits available in the market.
DESIGN FEATURES
A black seal with grease fitting makes it fast and easy to find a P-Kit.
200 5500, 200-5500, 2005500, 2855N, 339-55, 33955, 55N, 55R, 971-2005500, 9712005500, CBAN55, L55/55NW, PM200-5500
55 Series
PTO
Agricultural & Construction Machinery
2 of Weasler 200-7491 CV Unequal Cross & Bearing
- P-Kits are the Weasler Profile metric version of the R-Kit. P-Kits are standard and offer a high quality lube cycle of 8 hours which is acceptable for many applications. P-kits and E-kits are interchangeable with other cross and bearing kits in Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with P-kits can still be upgraded to E-kits or M-kits.
- 2380 CV Series
- PTO
Couplings, Collars & Universal Joiners
2 of Weasler 200-7676 Cross & Bearing Kit 32 MM Cap x 76 MM OAL w/External Snap Rings
- P-Kits are the Weasler Profile metric version of the R-Kit. P-Kits are standard and offer a high quality lube cycle of 8 hours which is acceptable for many applications. P-kits and E-kits are interchangeable with other cross and bearing kits in Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with P-kits can still be upgraded to E-kits or M-kits.
- 200 7676, 2007676, 971-2007676, 9712007676, WCB0-35, WCB035
- Walterscheid 2400 Series
- PTO
Couplings
Belden UJ-HD1000x00 KIT
HEAVY DUTY SINGLE UNIVERSAL JOINTS
The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models.
All components are heat treated, precision machined and ground to close tolerances.
The Heavy Duty universal joint provides exceptional service life in the most demanding applications.
All joints are available with or without a lubricant retaining boot.
Features
-
High grade-alloy steel
-
Maximum operating angles up to 45° (Special design options with higher angles may be available)
-
Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m] Ultimate Torque Lb-in [N-m]
| 450 [50] | 2250 [254] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1" | 0.995 [25.27] | n/a | 3.375 [85.7] | 1.688 [42.9] | 1.19 [30.2] | n/a | n/a |
Couplings
Belden UJ-HD1000x500K
HEAVY DUTY SINGLE UNIVERSAL JOINTS
The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
Features
-
High grade-alloy steel
-
Maximum operating angles up to 45° (Special design options with higher angles may be available)
-
Wide selection of hub configurations & finishes
| 450 [50] | 2250 [254] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1" | 0.995 [25.27] | 0.5000 [12.700] | 3.375 [85.7] | 1.688 [42.9] | 1.19 [30.2] | 1/8 x 1/16 | Yes |
Couplings
Belden UJ-HD1125x00 KIT
HEAVY DUTY SINGLE UNIVERSAL JOINTS
The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
Features
-
High grade-alloy steel
-
Maximum operating angles up to 45° (Special design options with higher angles may be available)
-
Wide selection of hub configurations & finishes
| 650 [73] | 3250 [367] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1-1/8" | 1.120 [28.45] | n/a | 3.500 [88.9] | 1.750 [44.5] | 1.20 [30.4] | n/a | n/a |
Couplings
Belden UJ-HD1125x563K
HEAVY DUTY SINGLE UNIVERSAL JOINTS
The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
Features
-
High grade-alloy steel
-
Maximum operating angles up to 45° (Special design options with higher angles may be available)
-
Wide selection of hub configurations & finishes
| 650 [73] | 3250 [367] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1-1/8" | 1.120 [28.45] | 0.5625 [14.288] | 3.500 [88.9] | 1.750 [44.5] | 1.20 [30.4] | 1/8 x 1/16 | Yes |