Search Results for: center bearing

Ruland MBC41-20-20-A Bellows Clamp Coupling 20 mm Bore

Ruland MBC41-20-20-A Bellows Clamp Coupling 20 mm Bore
16
Feb

Ruland MBC41-20-20-A Bellows Clamp Coupling 20 mm Bore

Description

Motion Control Coupling, Bore Diameter 1 20 mm, Bore Diameter 2 20 mm, Coupling Outside Diameter 41.3 mm,
Maximum Speed 10,000 RPM, Maximum Torque 28 N-m, Hub Material Aluminum,
Overall Length 50.8 mm, Shaft Locking Type Clamp On, System of Measurement Metric,
Bellows Material Stainless Steel, Different Bore Sizes No, Length Through Bore 1 24 mm,
Length Through Bore 2 24 mm, Parallel Misalignment 0.25 mm, Bore Type Round,
Dynamic Torque Non-Reversing 14 N-m, Dynamic Torque Reversing 7 N-m

 

Ruland MBC41-20-20-A Bellows Clamp Coupling 20 mm Bore

Continue reading →

Ruland MOST19-6-A Oldham Coupling Aluminum Hub 6mm Bore

Ruland MOST19-6-A Oldham Coupling Aluminum Hub 6mm Bore
16
Feb

Ruland MOST19-6-A Oldham Coupling Aluminum Hub 6mm Bore.

Ruland MOST19-6-A is a set screw oldham coupling hub with a 6mm bore, 19.1mm OD, and 7.6mm length.

It is a component of a three-piece design consisiting of two anodized aluminum hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

Disks are available in three materials allowing the user to tailor coupling performance to their application.

MOST19-6-A can accommodate all forms of misalignment and is especially useful in applications with high parallel misalignment (up to 10% of the OD).

It operates with low bearing loads protecting sensitive system components such as bearings and has a balanced design for reduced vibration at speeds up to 6,000 RPM.

Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities.

MOST19-6-A is machined from bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant.

It is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

Ruland MOST19-6-A Oldham Coupling Aluminum Hub 6mm Bore.

 

Continue reading →

Ruland MOST33-15-A Oldham Coupling Hub SS 15 mm Bore

Ruland MOST33-15-A Oldham Coupling Hub SS 15 mm Bore
16
Feb

Ruland MOST33-15-A Oldham Coupling Hub SS 15 mm Bore.

Ruland MOST33-15-A is a set screw Oldham coupling hub with a 15mm bore, 33.3mm OD, and 15.0mm length.

It is a component of a three-piece design consisting of two anodized aluminum hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

Disks are available in three materials allowing the user to tailor coupling performance to their application.

MOST33-15-A can accommodate all forms of misalignment and is especially useful in applications with high parallel misalignment (up to 10% of the OD).

It operates with low bearing loads protecting sensitive system components such as bearings and has a balanced design for reduced vibration at speeds up to 6,000 RPM.

Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities.

MOST33-15-A is machined from bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant.

It is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

Ruland MOST33-15-A Oldham Coupling Hub SS 15 mm Bore.

Continue reading →

Ruland OD8/13-AT Oldham Coupling Disk

Ruland OD8/13-AT Oldham Coupling Disk
16
Feb

Ruland OD8/13-AT Oldham Coupling Disk.

Ruland OD8/13-AT is an oldham coupling disk designed to fit hubs with an OD of 0.500″ (12.7mm).

It is a component of a three-piece design consisiting of two anodized aluminum or stainless steel hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

OD8/13-AT is made from acetal for zero-backlash and high torsional stiffness.

Oldham couplings can accommodate all forms of misalignment and are especially useful in applications with high parallel misalignment (up to 10% of the coupling OD).

They operate with low bearing loads protecting sensitive system components such as bearings and have a balanced design for reduced vibration at speeds up to 6,000 RPM.

OD8/13-AT is RoHS3 and REACH compliant.

Ruland OD8/13-AT Oldham Coupling Disk.

Continue reading →

Ruland MOCT19-7-A Oldham Coupling Clamp Hub 7 mm Bore

Ruland MOCT19-7-A Oldham Coupling Clamp Hub 7 mm Bore
16
Feb

Ruland MOCT19-7-A Oldham Coupling Clamp Hub 7 mm Bore.

Ruland MOCT19-7-A is a clamp oldham coupling hub with a 7mm bore, 19.1mm OD, and 9.7mm length.

It is a component of a three-piece design consisiting of two anodized aluminum hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

Disks are available in three materials allowing the user to tailor coupling performance to their application.

MOCT19-7-A can accommodate all forms of misalignment and is especially useful in applications with high parallel misalignment (up to 10% of the OD).

It operates with low bearing loads protecting sensitive system components such as bearings and has a balanced design for reduced vibration at speeds up to 6,000 RPM.

Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities.

MOCT19-7-A is machined from bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant.

It is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

Ruland MOCT19-7-A Oldham Coupling Clamp Hub 7 mm Bore.

 

Continue reading →

Ruland MOSC41-15-A Oldham Coupling Hub SS w Kw

Ruland MOSC41-15-A Oldham Coupling Hub SS w Kw
16
Feb

Ruland MOSC41-15-A Oldham Coupling Hub SS w Kw.

Ruland MOSC41-15-A is a set screw oldham coupling hub with a 15mm bore, 5mm keyway, 41.3mm OD, and 18.0mm length.

It is a component of a three-piece design consisiting of two anodized aluminum hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

Disks are available in three materials allowing the user to tailor coupling performance to their application.

MOSC41-15-A can accommodate all forms of misalignment and is especially useful in applications with high parallel misalignment (up to 10% of the OD).

It operates with low bearing loads protecting sensitive system components such as bearings and has a balanced design for reduced vibration at speeds up to 6,000 RPM.

Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities.

MOSC41-15-A is machined from bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant.

It is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

Ruland MOSC41-15-A Oldham Coupling Hub SS w Kw.

Continue reading →

Ruland MOSC25-8-A Oldham Coupling Hub w Kw

Ruland MOSC25-8-A Oldham Coupling Hub w Kw
16
Feb

Ruland MOSC25-8-A Oldham Coupling Hub w Kw.

Ruland MOSC25-8-A is a set screw Oldham coupling hub with a 8mm bore, 2mm keyway, 25.4mm OD, and 9.9mm length.

It is a component of a three-piece design consisting of two anodized aluminum hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

Disks are available in three materials allowing the user to tailor coupling performance to their application.

MOSC25-8-A can accommodate all forms of misalignment and is especially useful in applications with high parallel misalignment (up to 10% of the OD).

It operates with low bearing loads protecting sensitive system components such as bearings and has a balanced design for reduced vibration at speeds up to 6,000 RPM.

Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities.

MOSC25-8-A is machined from bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant.

It is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

Ruland MOSC25-8-A Oldham Coupling Hub w Kw.

Continue reading →

Ruland MOCC25-8-A Oldham Coupling Hub w Kw

Ruland MOCC25-8-A Oldham Coupling Hub w Kw
16
Feb

Ruland MOCC25-8-A Oldham Coupling Hub w Kw

Ruland MOCC25-8-A is a clamp oldham coupling hub with a 8mm bore, 2mm keyway, 25.4mm OD, and 11.9mm length.

It is a component of a three-piece design consisiting of two anodized aluminum hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

Disks are available in three materials allowing the user to tailor coupling performance to their application.

MOCC25-8-A can accommodate all forms of misalignment and is especially useful in applications with high parallel misalignment (up to 10% of the OD).

It operates with low bearing loads protecting sensitive system components such as bearings and has a balanced design for reduced vibration at speeds up to 6,000 RPM.

Hardware is metric and tests beyond DIN 912 12.9 standards for maximum torque capabilities.

MOCC25-8-A is machined from bar stock that is sourced exclusively from North American mills and is RoHS3 and REACH compliant.

It is manufactured in our Marlborough, MA factory under strict controls using proprietary processes.

Ruland MOCC25-8-A Oldham Coupling Hub w Kw.

Continue reading →

Ruland OD12/19-AT Oldham Coupling Disk

Ruland OD12/19-AT Oldham Coupling Disk
16
Feb

Ruland OD12/19-AT Oldham Coupling Disk

Ruland OD12/19-AT is an Oldham coupling disk designed to fit hubs with an OD of 0.750″ (19.1mm).

It is a component of a three-piece design consisting of two anodized aluminum or stainless steel hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

OD12/19-AT is made from acetal for zero-backlash and high torsional stiffness.

Oldham couplings can accommodate all forms of misalignment and are especially useful in applications with high parallel misalignment (up to 10% of the coupling OD).

They operate with low bearing loads protecting sensitive system components such as bearings and have a balanced design for reduced vibration at speeds up to 6,000 RPM.

OD12/19-AT is RoHS3 and REACH compliant.

Ruland OD12/19-AT Oldham Coupling Disk.

Continue reading →

Ruland OD8/13-NL Oldham Coupling Disk

Ruland OD8/13-NL Oldham Coupling Disk
16
Feb

Ruland OD8/13-NL Oldham Coupling Disk

Ruland OD8/13-NL is an Oldham coupling disk designed to fit hubs with an OD of 0.500″ (12.7mm).

It is a component of a three-piece design consisting of two anodized aluminum or stainless steel hubs press fit onto a center disk.

This three-piece design allows for a highly customizable coupling that easily combines clamp or set screw hubs with inch, metric, keyed, and keyless bores.

OD8/13-NL is made from nylon for shock absorption and damping.

Oldham couplings can accommodate all forms of misalignment and are especially useful in applications with high parallel misalignment (up to 10% of the coupling OD).

They operate with low bearing loads protecting sensitive system components such as bearings and have a balanced design for reduced vibration at speeds up to 6,000 RPM.

OD8/13-NL is RoHS3 and REACH compliant.

Ruland OD8/13-NL Oldham Coupling Disk.

Continue reading →