TSC500 500 ft lb (static torque) replacement for universal joint in a driveshaft, steering, axle and any universal joint replacement. Replace any Spicer, Lovejoy, GKN, Moog and Neapco universal joint coupling.
Couplings in the automotive industry have a number of issues to contend with, annual maintenance, replacement of worn components, the automobile has evolved but the technology that makes up the universal joint has not. Twin Spring Coupling offers something different.
Traditional couplings have to be balanced and can only run at angles of 8 ° or less otherwise you get wear in the bearings within the propeller shaft of the universal joint, the bearing races will start to wear on the outside which means the ball bearings will become loose and that creates vibration and with continual wear the ball bearings will fail.
The bearings need also to be constantly greased otherwise the ball bearings will not have any lubrication, and with them running at high speed the balls will seize in their tracks again leading to bearing failure.
Ball bearings being very precise instruments also need to be contained to ensure infiltration by any foreign contaminants, as things like water, mud, dust or dirt will again cause the ball bearings to seize in their tracks and this means bearing failure.
The other downside to a universal joint are the yokes which the bearings are contained in, the coupling piece of the yokes are quite tough but the section that contains the bearings not so much as they have to hold the bearings, this is a weak point as the bearings are usually less than 2″ across so the machining to contain the bearings is alot smaller than the rest of the yoke, which means the likely of them cracking is that much higher.
Cracking leads to catastrophic failure and replacement of both the yoke and universal joint is assured. This makes it an expensive repair as with the price of the yoke and universal joint, it is usually cheaper just to replace everything, both yokes and the propeller joint.
Twin Spring Coupling is different it replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. It can also replace any U joint offroad model as well.
Designed with no internal bearings, means our coupling is truly maintenance free, making it impervious to water, mud, dust, dirt and other contaminants. This saves time and on annual maintenance bills.
By being a one piece design also means Twin Spring Coupling wont break like the yokes do in traditional uni joints.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM.
Time to replace the oldest part of the automobile
Universal joint replacement for Spicerparts, Lovejoy , Neapco, Moog, SKF, Spicer, GMB, Lovejoy couplings
Flexible up to 30 degrees Under load (45 degrees not under load)
Spicer 1310 and 1350 replacement Lovejoy DD8B, Lovejoy D10SS, Lovejoy NB10B replacement