TSC500 mining coupling replaces universal joint and other flexible couplings in any driveshaft, steering and any other power transmission requirement you may have.
Flexible couplings in the mining industry have a number of issues to contend with, annual maintenance, hostile work environment including water, dust and debris, lost productivity due to unscheduled coupling failure.
Twin Spring Couplings simple 1 piece design replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design.
- Conveyor belts
- Mining vehicles
- Plant Equipment
Designed with no internal components like bearings, means our coupling is truly maintenance free.
This makes it impervious to water, mud, dust, dirt and other contaminants. This saves time and on annual maintenance bills. Time means money and downtime especially unscheduled downtime can be very costly.
Do we have the people and parts to fix the problem? If not how long will it take, and in some instances losing $1,000 to $10,000’s per hour makes cheap couplings not that cheap.
Add to that the annual maintenance bill for greasing and replacing worn universal joints to keep them from breaking down is another cost both in component costs but again lost productivity.
Worn bearings are the main factor in universal joint replacement either the pre lubricated or the greased version. The cheap cost of the bearing cross for most people think its a worthwhile coupling but the amount of labor involved in regards to monthly maintenance, greasing and eventual replacement means it makes it not as cheap as initially thought.
The other aspect of the bearing cross is the availability of them as well, if they aren’t in stock with the supplier etc then the machinery cannot be used until they are replaced.
By being a one piece design also means Twin Spring Coupling wont break like the yokes do in traditional uni joints.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM.
Flexible up to 20 degrees Under load (35 degrees not under load)
Lower maintenance cost, improves flexibility, 1 piece design makes Twin Spring coupling the right choice to replace your old universal joints
Helical – W, DS, MCA,MC7, A and H series Beam and Servo couplings
Ruland – Beam Bellows Jaw F series beam, P series beam, BC bellows MB bellows, JC jaw , MJC jaw
Guardian Couplings – Dynaline 1d-4d, Curved jaw 28/38, 38/45, 42/55,48/60, Spec I-32 Spec I-45 Spec I-65, Flexible Membrane coupling model 66, Oldham coupling 57, multibeam coupling 57, 64
TB Woods – Dura Flex WE 5/10/20/30/40, L Jaw L150/AL150/SS150, L190/L225, L276, G Flex grid coupling 1000T10/1000T20 1050, 1060
Lovejoy– C226 C276 (SOX) CJ 48/60 CJ42/55, CJ38/45, CJ28/38, D-6,D-7,NB-8,DD-7,LOJ10, D-8,NB-10,DD-8, Uniflex 150 reg, Timken
R+W America – Elastomeric coupling EK
Tsubaki – L110, L150, L190, L225 jaw coupling series
Belden – UJ-HD UJ-HS Needle-Bearing universal joints UJ-NB MIL-DTL-6193D MS20270 (Military specs)
Huco – Flex K Bellow 550
SIT -Trasco ES, SIT GU universal Joints
GMB – GU series (Euro truck) ST1XXXX (steering uni) GUA (Farming) MC Series (auto)
Moog – 1500 PTO (replaces Domestic Standard Series 1000) 1800 series @1000RPM Replaces Domestic Standard series 35, 1300 series replaces domestic standard series 14, 1200 series replaces Domestic Standard series 12, W2300 German Style Waltersheid 2300 Series, W2200 Series German Style Waltersheid 2200 Series, Italian style Bondioli & Pavesi 3 Series, Italian style Bondioli & Pavesi 4 Series, Italian style Bondioli & Pavesi 5 Series, W2400 Series German Style Waltersheid 2400 Series (@ 1000RPM)
Neapco – 1-1001 WALTERSCHEID SERIES 2100, ASAE Cat 1 L600/1-1475 ASAE Cat 2 1200/1-1275, ASAE Cat 3 1800/1-1875 2000/1-2075, Metric Cat 3 Series 4/2300 1-10421/1-0321,1-022, 1-0170
Weasler – 6 (200-0600) 12 (200-1200) 1800 (200-1875) 14 (200-1400) (200-8474) (200-8730), (200-8261)
Bondioli – S5/6 series G 3/4/5 series
Walterscheid – G2200, G2300 (@1000RPM), P300(@1000RPM), W300E
Spicer – 1000/ 1140/1240/1310