No products in the cart.
TSC500 Ag Z6 1 3/8″ PTO Type 1
$220.00
TSC500 Ag Z6 1 3/8″ coupling replacement for universal joint in a driveshaft, steering, axle and attachment.
Couplings in the agricultural industry have a number of issues to contend with, annual maintenance, constant greasing, hostile environment, replacement components, downtime during critical times of the year (planting, harvesting, etc) Twin Spring Coupling TSC500 Ag offers something different.
It replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design.
Uses include.
- Driveline
- Augers
- Conveyors
- Steering
- PTO attachments
- Pumps
- Motors
- Attachments
- Work vehicles
- ATV’s
Replaces Weasler, Walterscheid, Neapco, Bondioli, Spicer, SKF u joints and flexible shaft couplings.
Available on backorder
Description
TSC500 Ag Z6 1 3/8″ PTO coupling replacement for universal joint and jaw couplings in a driveshaft, steering and attachments.
Couplings in the agricultural industry have a number of issues to contend with, annual maintenance, constant greasing, hostile environment, replacement components, downtime during critical times of the year (planting, harvesting, etc) Twin Spring Coupling TSC500 Ag offers something different.
It replaces the entire U joint, yokes, propeller, bearings cross everything, with a simple one piece design. No worn or failed bearing, no greasing every 8 or 50 hours, no broken hubs.
Uses include
- Driveline
- Augers
- Conveyors
- Steering
- PTO attachments
- Attachments
- Pumps
- Motors
- Work vehicles
- ATV’s
Designed with no internal components like bearings, means our coupling is truly maintenance free, making it impervious to water, mud, dust, dirt and other contaminants. This saves time and on annual maintenance bills.
The universal joint bearings wear in two ways, first the daily use of the product and secondly and more critically the angle at what the coupling joint is being used at.
As the higher the angle of misalignment during use the more the bearings will wear against the inside edge of the race. This means increased vibration which can result in equipment damage and/or bearing failure.
By being a one piece design also means Twin Spring Coupling wont break like the yokes do in traditional uni joints. The yokes while substantial where they connect to the input/output shafts are a lot smaller where they connect to the universal cross joint.
This makes it a weak point and with the tough work they experience farming are prone to cracking which means the yoke will have to be replaced meaning it has to be removed and wait for the new yoke to arrive and then reinstallation, which is both time and money.
Our TSC500 Ag Z6 coupling is available in all the standard industry splines for easy replacement or retrofit for OEM.
Flexible up to 25 degrees Under load (35 degrees not under load)
Replaces
TB Woods – Dura Flex WE 30, WE 40, L Jaw L276 (TSC500) G Flex grid coupling 1000T10/1000T20 1060
Lovejoy – C226 C276 (SOX) CJ 48/60 42/55, CJ38/45, D6, D7, NB8, DD7, LOJ10, D8, NB10, DD8, Uniflex 150 reg, Timken
R+W America – Precision Coupling BK series metal couplings Elastomeric coupling EK
Tsubaki – L150, L190, L225
Belden – UJ-HD UJ-HS Needle-Bearing universal joints UJ-NB MIL-DTL-6193D MS20270 (Military specs)
Huco – Flex K Bellow 550
SIT – Trasco ES, SIT GU universal Joints
KTR – Rotex Jaw coupling
GMB – GU series (Euro truck) ST1XXXX (steering uni) GUA (Farming)
Moog – 1500 PTO (replaces Domestic Standard Series 1000) 1800 series @1000RPM Replaces Domestic Standard series 35, 1300 series replaces domestic standard series 14, 1200 series replaces Dom Std series 12, W2300 German Style Walterscheid 2300 Series, W2200 Series German Style Walterscheid 2200 Series, Italian style Bondioli & Pavesi 3 Series, Italian style Bondioli & Pavesi 4 Series , Italian style Bondioli & Pavesi 5 Series, W2400 Series German Style Walterscheid 2400 Series (TSC500 @ 1000RPM), 338 838 340 341 Mechanics 2C 452 952 454 994 453 951 Spicer 1210 237 240 437 437G 341AG 341BL 813 344 Spicer 1310 369 379 380.
SKF – UJ338 UJ838 UJ340 UJ 341, UJ452, UJ952, UJ454, UJ994, UJ453, UJ951, UJ237, UJ240, UJ437, UJ437G, 341AG, UJ341BL, UJ813, UJ344, UJ369, UJ379, UJ380.
Neapco – 1-1001 WALTERSCHEID SERIES 2100, ASAE Cat 1 L600/1-1475 ASAE Cat 2 1200/1-1275, ASAE Cat 3 1800/1-1875 2000/1-2075, Metric Cat 3 Series 4/2300 1-10421/1-0321, 1-0221, 1-0170
Bondioli – S4, S5, S6, G3, G4 G5
Walterscheid – G2100, G2200, G2300([email protected]), P300 ([email protected]), W300E, W200E, W100E
Additional information
| Weight | 320 oz |
|---|---|
| Dimensions | 11.142 × 3.2 in |
| 1":1" | 1 inch (1") input 1 inch " Keyway |
| Z6 1 inch (1"- 25.4mm) | 6 teeth 1 inch (1") spline input, 6 teeth 1 inch (1") spline output |
| Z6 1 3/8 inch (1 3/8" - 34.9mm) | Z6 1 3/8 inch (1 3/8") input and 6T 1 3/8 inch (1 3/8") output |
Reviews (0)
Be the first to review “TSC500 Ag Z6 1 3/8″ PTO Type 1”
Related products
Industrial power transmission couplings
Lovejoy NB-10B – TSC500 1″ Keyway Universal Joint replacement
$380.00
Lovejoy NB-10B 1" universal Joint, replace today with a Twin Spring Coupling TSC500.
Dual springs absorb vibration. Flexible to 35°. High Speed. No inserts - No maintenance. No bearings to grease or replace when worn. One piece design - No broken hubs or worn spider inserts.
Industrial power transmission couplings
$150.00
TSC150 Industrial 1/4" Keyway coupling replacement for industrial coupling users.
Replace any flexible coupling, whether its a Jaw or Lovejoy D4 universal joint with a maintenance free flexible alternative.
Couplings in the industrial sector traditionally are broken into two sectors, the beam/bellows or elastomeric couplings that can only run at angles of 4° or less otherwise they wear out, as they cannot physically flex beyond that, normally they run at 2°. The other are universal joints which can normally only run at 8° otherwise prematurely wearing the bearings within the propeller shaft of the universal joint. The bearing races will start to wear on the outside which means the ball bearings will become loose and that creates vibration and with continual wear the ball bearings will fail. The bearings need also to be constantly greased otherwise the ball bearings will not have any lubrication, and with them running at high speed the balls will seize in their tracks again leading to bearing failure. Jaw couplings the spiders wear after use of 1-2° and yokes can crack. Bellows are only good for 2° before they start to wear. Twin Spring Coupling can run up to 20° without needing to be lubrication, and at low angles of misalignment and comparable high speeds to traditional industrial couplings. Replace Lovejoy coupling, Neapco, Belden, Ruland, Helical, TB Woods, Altra, Tsubaki, Moog, Boston Gear and Spicer couplings.
Agriculture Universal Joint replacement (PTO, Attachment, Steering and Driveline)
$220.00
TSC500 Ag Z20 PTO 20 Teeth (1 3/4") coupling replacement for universal joint in a driveshaft, steering, axle and attachment.
Couplings in the agricultural industry have a number of issues to contend with, annual maintenance, constant greasing, hostile environment, replacement components, downtime during critical times of the year (planting, harvesting, etc) Twin Spring Coupling offers something different. It replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. The TSC500 Ag 20T uses include.- Driveline
- Augers
- Headers
- Conveyors
- Steering
- PTO attachments
- Pumps
- Motors
- Attachments
- Work vehicles
- ATV's
Industrial power transmission couplings
$380.00
Lovejoy NB-10B 1 3/4" universal Joint, replace today with a Twin Spring Coupling TSC500.
Dual spring design absorbs vibration. Flexible to 35°. High Speed Up to 7000 RPM. No bearings to grease or replace when worn. One piece design - No broken hubs or worn spider inserts.
Automotive - Universal Joint replacement (Driveline, Steering & PTO)
$190.00
TSC300 Auto is a replacement for universal joint in a driveshaft, steering, axle and any universal joint replacement. Replace any Spicer, SKF, Neapco or Moog universal joint coupling.
Couplings in the automotive industry have a number of issues to contend with, annual maintenance, the automobile has evolved but the technology that makes up the universal joint has not. Twin Spring Coupling TSC 300 Auto offers something different. Traditional couplings have to be balanced and can only run at angles of 8° or less otherwise you get wear in the bearings within the propeller shaft of the universal joint. The bearing races will start to wear on the outside which means the ball bearings will become loose and that creates vibration and with continual wear the ball bearings will fail. Use our twin spring design, flexible with the ability to handle high torque and high speed, with no internal components to replace.
Agriculture Universal Joint replacement (PTO, Attachment, Steering and Driveline)
$220.00
TSC500 Agriculture Z21 1 3/8" Type 2 PTO replacement coupling for universal joint in a driveshaft, steering, axle and attachment.
Couplings in the agricultural industry have a number of issues to contend with, annual maintenance, constant greasing, hostile environment, replacement components, downtime during critical times of the year (planting, harvesting, etc) Twin Spring Coupling offers something different. It replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. Uses include- Driveline
- Augers
- Headers
- Conveyors
- Steering
- PTO attachments
- Pumps
- Motors
- Attachments
- Work vehicles
- ATV's
Industrial power transmission couplings
$190.00
TSC300 industrial a 300 ft lb replacement for flexible coupling and universal joint in any industrial power transmission application.
Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. Of the universal joint there are 2 versions available in the industrial sector, the Block and Pin (1800 RPM max) and Needle bearing (requires constant greasing), this makes the TSC300 industrial a longer lasting more flexible higher torque and with the same splines used now a easy replacement.Replaces
Altra Motion, Belden, Tsubaki, Lovejoy, TB Woods, Guardian Couplings, Ruland, Boston Gear, Rexnord, SKF.
Industrial universal joints
$190.00
TSC300 mine - 300 ft lb replacement for universal joint in any piece of equipment, whether it be vehicle, conveyor or pump. Replace a century old three piece system with a simple maintenance free one piece design. Couplings in the mining industry have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, the automobile has evolved but the technology that makes up the universal joint has not. Twin Spring Coupling offers something different. It replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. It can also replace any U joint offroad model as well. Replaces Spicer, Lovejoy, Moog, Weasler, Walterscheid, Neapco, SKF and Belden couplings and more
Industrial power transmission couplings
$190.00
Lovejoy D-7 3/4" universal joint.
Replace with TSC300 300 ft lbs replacement for mechanical power transmission couplings and universal joint in any industrial power transmission application. Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard coupling and universal joint has not. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings. Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. No bearings to grease or replace. Flexible as a needle bearing universal joint. Torsionally rigid for high speed applications. One piece design. Replaces. Spicer KTR SIT. Huco Altra Belden. Tsubaki R+W Lovejoy. TB Woods Guardian Couplings Ruland. Helical McMaster Carr Boston Gear. Neapco Moog SKF.
Industrial power transmission couplings
$220.00
Lovejoy D-6B 1/2" universal Joint, replace today with a Twin Spring Coupling TSC150.
Flexible to 25°. High Speed Up to 7000 RPM. No block and pin - No maintenance. One piece design - No broken hubs, worn friction bearings or greasing.
Industrial power transmission couplings
$220.00
Twin Spring Coupling TSC500 Industrial mechanical power transmission couplings have no internal components so no annual maintenance and can run at high and low speed as needed.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM. Flexible up to 20 degrees Under load (25 degrees not under load)Replaces
Spicer KTR SIT Huco Altra Belden Tsubaki R+W Lovejoy TB Woods Guardian Couplings Ruland Helical McMaster Carr Boston Gear Neapco Moog SKF
Industrial power transmission couplings
$380.00
Lovejoy D-8B 1/2" universal Joint, replace today with a Twin Spring Coupling TSC500.
Flexible to 35°. High Speed. No bearings or block/pins - No maintenance. One piece design - No broken hubs or worn bearings.
Agriculture Universal Joint replacement (PTO, Attachment, Steering and Driveline)
$190.00
TSC300 Ag 1" Agriculture replacement for universal joint in a driveshaft, steering, axle and attachments. Couplings in the agricultural industry have a number of issues to contend with, annual maintenance, constant greasing, hostile environment, replacement components, downtime during critical times of the year (planting, harvesting, etc) Twin Spring Coupling offers something different. It replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. Uses include
- Driveline
- Augers
- Conveyors
- Steering
- Pumps
- Motors
- PTO attachments
- Attachments
- Work vehicles
- ATV’s
Agriculture Universal Joint replacement (PTO, Attachment, Steering and Driveline)
$190.00
TSC300 Agriculture
replacement for universal joint in a driveshaft, steering, axle and attachments. Couplings in the agricultural industry have a number of issues to contend with, annual maintenance, constant greasing, hostile environment, replacement components, downtime during critical times of the year (planting, harvesting, etc) Twin Spring Coupling offers something different. It replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. Uses include- Driveline
- Augers
- Conveyors
- Steering
- Pumps
- Motors
- PTO attachments
- Attachments
- Work vehicles
- ATV’s
Twin Spring Coupling TSC500 Automotive
$220.00
TSC500 Auto
500 ft lb (static torque) replacement for universal joint in a driveshaft, steering, axle and any universal joint replacement. Replace any Spicer 1300-1310 u joint (models 5-3214x and 5-3213x) GKN, Moog and Neapco universal joint coupling. Couplings in the automotive industry have a number of issues to contend with, annual maintenance, replacement of worn components, the automobile has evolved but the technology that makes up the universal joint has not. Twin Spring Coupling offers something different. Twin Spring Coupling is different it replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. It can also replace any U joint off-road model as well. Designed with no internal bearings, means our coupling is truly maintenance free, making it impervious to water, mud, dust, dirt and other contaminants. This saves time and on annual maintenance bills. Universal joint replacement for Spicer, Spicerparts, Neapco, Moog, SKF, Spicer, GMB, Belden couplings. Flexible up to 20 degrees Under load (35 degrees not under load).
Industrial power transmission couplings
$150.00
TSC150 Industrial.
A coupling replacement for industrial coupling users. Replace any flexible coupling, whether its a beam, bellows, Jaw or universal joint with a maintenance free flexible alternative. Couplings in the industrial sector traditionally are broken into two sectors, the beam/bellows or elastomeric couplings that can only run at angles of 4° or less otherwise they wear out, as they cannot physically flex beyond that, normally they run at 2°. The other are universal joints which can normally only run at 8° otherwise prematurely wearing the bearings within the propeller shaft of the universal joint, the bearing races will start to wear on the outside which means the ball bearings will become loose and that creates vibration and with continual wear the ball bearings will fail. The bearings need also to be constantly greased otherwise the ball bearings will not have any lubrication, and with them running at high speed the balls will seize in their tracks again leading to bearing failure. Jaw couplings the spiders wear after use of 1-2° and yokes can crack. Bellows are only good for 2° before they start to wear. Beam couplings can only run at 2°. Twin Spring Coupling can run up to 20° without needing to be lubrication, and at low angles of misalignment and comparable high speeds to traditional industrial couplings. Replace Lovejoy, Neapco, Belden, Ruland, Helical, TB Woods, Altra, Tsubaki, Moog, Boston Gear, and Spicer couplings.
Industrial power transmission couplings
$150.00
TSC150 Industrial 3/8" keyway.
Mechanical power transmission couplings are a replacement for industrial coupling users. Replace any flexible coupling, whether its a beam, bellows, Jaw or universal joint with a maintenance free flexible alternative. Couplings in the industrial sector traditionally are broken into two sectors, the beam/bellows or elastomeric couplings that can only run at angles of 4° or less otherwise they wear out, as they cannot physically flex beyond that, normally they run at 2°. The other are universal joints which can normally only run at 8° otherwise prematurely wearing the bearings within the propeller shaft of the universal joint, the bearing races will start to wear on the outside. The ball bearings will become loose and that creates vibration and with continual wear the ball bearings will fail. The bearings need also to be constantly greased otherwise the ball bearings will not have any lubrication, and with them running at high speed the balls will seize in their tracks again leading to bearing failure. Jaw couplings the spiders wear after use of 1-2° and yokes can crack. Bellows are only good for 2° before they start to wear. Beam couplings can only run at 2° Twin Spring Coupling can run up to 20° without needing to be lubrication, and at low angles of misalignment and comparable high speeds to traditional industrial couplings. Replace Lovejoy, Neapco, Belden, Ruland, Helical, TB Woods, Altra, Tsubaki, Moog, Boston Gear and Spicer couplings
Industrial power transmission couplings
$380.00
Lovejoy D-10B 3/4" universal Joint, replace today with a Twin Spring Coupling TSC500. Dual Spring design absorbs vibration. Flexible to 35°. High Speed. No bearings - No maintenance. One piece design - No broken hubs or worn spider inserts.
Agriculture Universal Joint replacement (PTO, Attachment, Steering and Driveline)
$190.00
TSC300 Agriculture replacement for universal joint in a driveshaft, steering, axle and attachments.
Couplings in the agricultural industry have a number of issues to contend with, annual maintenance, constant greasing, hostile environment, replacement components, downtime during critical times of the year (planting, harvesting, etc) Twin Spring Coupling offers something different. It replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. Uses include- Driveline
- Augers
- Conveyors
- Steering
- Pumps
- Motors
- PTO attachments
- Attachments
- Work vehicles
- ATV’s
Industrial power transmission couplings
$190.00
TSC300 Industrial replacement for mechanical power transmission couplings and universal joint in any industrial power transmission application.
Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard coupling and universal joint has not. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings - Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. No bearings to grease or replace. No worn spider or inserts to replace. Flexible as a universal joint. Torsionally rigid for high speed applications. One piece design. Replaces. Spicer KTR SIT Huco Altra Belden Tsubaki R+W Lovejoy TB Woods Guardian Couplings Ruland Helical McMaster Carr Boston Gear Neapco Moog SKF
Industrial power transmission couplings
$190.00
Lovejoy NB-8 3/4" universal joint.
with TSC300 replacement power transmission couplings and universal joint in any industrial power transmission application. No bearings to grease or replace. Flexible to 45°. Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard coupling and universal joint has not. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings. Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. Torsionally rigid for high speed applications. One piece design. Replaces. Spicer KTR SIT. Huco Altra Belden. Tsubaki R+W Lovejoy. TB Woods Guardian Couplings Ruland. Helical McMaster Carr Boston Gear. Neapco Moog SKF.
Agriculture Universal Joint replacement (PTO, Attachment, Steering and Driveline)
$220.00
TSC500 Agriculture replacement for universal joint in a driveshaft, steering and PTO attachment. Couplings in the agricultural industry have a number of issues to contend with, annual maintenance, constant greasing, hostile environment, replacement components, downtime during critical times of the year (planting, harvesting, etc) Twin Spring Coupling offers something different. It replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design. Uses include
- Driveline
- Augers
- Conveyors
- Steering
- PTO attachments
- Pumps
- Motors
- Attachments
- Work vehicles
- ATV's
Industrial power transmission couplings
$220.00
TSC500 Industrial 3/4" power transmission coupling.
Twin Spring Coupling mechanical power transmission couplings have no internal components so no annual maintenance and can run at high and low speed as needed. Replaces Lovejoy D8 and NB8 universal joints plus many others.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM. Flexible up to 20 degrees Under load (25 degrees not under load).Replaces
Spicer KTR SIT. Huco Altra Belden. Tsubaki R+W Lovejoy. TB Woods Guardian Couplings Ruland. Helical McMaster Carr Boston Gear. Neapco Moog SKF.
Industrial power transmission couplings
$220.00
Reviews
There are no reviews yet.