Lovejoy L-190 Jaw coupling Replacement – TSC500 1 3/4″ Keyway, replace your old jaw coupling today.
TSC500 1 3/4″ shaft with Keyway jaw coupling replacement for mechanical power transmission couplings. Replace your Lovejoy L-190 with a maintenance free, flexible shaft coupling alternative.
Couplings in the industrial sector traditionally are broken into two sectors, elastomeric couplings which included jaw couplings, that can only run at angles of 4° or less otherwise they wear out, as they cannot physically flex beyond that, normally they run at 2°. The other are universal joints.
Lovejoy L-190 Jaw couplings are a 3 piece elastomeric coupling, an input and output hub and a spider insert, the insert can be made up of 3 different materials SOX – (NBR), Urethane, Hytrel and Bronze.
Each insert gets progressively stiffer and less able to absorb vibration so the angular misalignment becomes smaller with each insert. This coupling is broken down across two Twin Spring Coupling models.
The Sox and Urethane models with the TSC300 and the Hytrel and Bronze with the TSC500 model.
Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard jaw coupling.
Twin Spring Coupling offers something different.
Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings.
Motion control couplings like Lovejoy L-190 jaw couplings and the universal joint.
The problem with both couplings are their fundamental design weaknesses, for motion control coupling they can run fast but cannot work at over 4 degrees of misalignment before they start to wear out.
The universal joint can run at more than 4 degrees but needs constant maintenance to keep the bearings and pivot point greased or they too will wear out quickly.
On top of that they traditionally cannot run over 8 degrees before technical issues like balancing and bearing wear become issues. In a 24/7/365 situation like industrial power transmission that’s going to create interruption and a increased annual maintenance bill.
TSC500 how it’s different to the Lovejoy.
The one piece design means no greasing, no replacing components just a annual checkup, vital in industrial 24/7 applications.
Twin Spring Coupling (TSC) 300 has no internal components so no annual maintenance and can run at high and low speed as needed.
Twin Springs absorb vibration much like the spider insert does in a jaw coupling.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM.
Flexible up to 25 degrees Under load (35 degrees not under load).
Ruland – UJ-HD1250, UJ-HS1000-1125, JC jaw , MJC jaw couplings.
Guardian Couplings – Curved jaw 28/38, 38/45, 42/55,48/60, Guardex M-80, Spec I-65, LJW150-LJW225.
TB Woods – Dura Flex WE 40, L Jaw L090/L100/AL100/SS100/L110/AL110/SS110, L150, AL150, SS150, L190, L225, L276, G Flex grid coupling 1000T10, 1000T20, 1050.
Belden – MS20271B24, UJ-NB2000x1000, SS-UJ-NB2000x1000
Rexnord – Omega Orange 30-40, Omega HDY 30, Viva 190-215, Falk Wrapflex 30R.
SKF – FRC230, SKF Flex 140, UJMA40.
KTR – Rotex AL-H 42/48 (48-92/98), GJL 38/48/55/65 (48 92-98) (55 92-98) (65 92A)
Boston Gear – FC 45 XFCBB, Rubber XFCR, XFCA Poly, UJ-J200, UJNL 24-24.
For more information on the TSC500 go to https://twinspringcoupling.com/coupling-products/tsc-500/.