Showing 1–12 of 31 results

 

Industrial Couplings replacement

TSC 300 A new maintenance free power transmission coupling alternative to Universal joints, Jaw couplings and elastomeric couplings

  • Larger angle of usage – operational usage of over 30°
  • Able to absorb vibration with its twin spring design
  • Bi directional high-low speed design
  • No moving parts, no bearings/spiders so no regreasing required or internal components to replace, this saves you time and money
  • No vibration
  • ​Can run in water, mud, dust and dirt
  • Springs allow transfer shock to be absorbed, nullifying “jackhammer” shock and reducing the chance of damage to the powertrain.
  • 90+% efficient, torque is absorbed and transferred making it one of the most fuel efficient power coupling units available
  • ISO9001 2007 certified manufactured
  • Available in 3/4″- 1 3/4″ Keyway, 1 3/8″ Z6 (6T) Type 1 PTO (540 RPM) 1 3/8″ Z21 (21T) Type 2 PTO (1000 RPM) 1 3/8″ Z20 (20T) PTO 

TSC300 rating - nominal torque rating for TSC300

Industrial power transmission couplings

Lovejoy D-8B – TSC300 3/4″

$220.00

Lovejoy D-8B universal Joint, replace today with a Twin Spring Coupling TSC300.

3/4" input/Output shaft sizing. Flexible to 45°. High Speed - 7000 RPM. One piece design - No broken hubs or worn block and pin.  

Industrial power transmission couplings

Lovejoy L-110 – TSC300 1 1/2″ Jaw coupling replacement

$190.00

Lovejoy L-110 1 1/2" jaw couplings, replace today with a Twin Spring Coupling TSC300 1 1/2".

Flexible to 45°. High Speed. Up to 7000 RPM High Torque. Twin Spring design absorbs vibration No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy L-110 – TSC300 1 1/4″ Jaw coupling replacement

$190.00

Lovejoy L-110 1 1/4" jaw couplings, replace today with a Twin Spring Coupling TSC300 1 1/4".

Flexible to 35°. Dual springs absorbs vibration. High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy L-110 – TSC300 1 3/4″ Jaw Coupling replacement

$190.00

Lovejoy L-110 1 3/4" jaw couplings, replace today with a Twin Spring Coupling TSC300 1 3/4".

Flexible to 35°. High Speed Up to 7000 RPM. Dual spring design absorbs vibration. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy L-150 – TSC300 1 3/4″ Jaw coupling replacement

$190.00

Lovejoy L-150 1 3/4" jaw coupling replacement by the TSC300 300 ft lbs replacement for Jaw couplings in any industrial power transmission application.

Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard jaw coupling. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings - Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. No bearings to grease or replace. Dual Spring absorbs vibration. No worn spider or inserts to replace. Flexible as a universal joint. Torsionally rigid for high speed applications. One piece design. Replaces. KTR, SIT,  Altra Motion, Belden, Tsubaki, R+W, Lovejoy, TB Woods, Guardian Couplings, Ruland, Helical, Boston Gear.

Automotive - Universal Joint replacement (Driveline, Steering & PTO)

TSC300 Auto

$190.00

TSC300 Auto is a replacement for universal joint in a driveshaft, steering, axle and any universal joint replacement. Replace any Spicer, SKF, Neapco or Moog universal joint coupling.

Couplings in the automotive industry have a number of issues to contend with, annual maintenance, the automobile has evolved but the technology that makes up the universal joint has not. Twin Spring Coupling TSC 300 Auto offers something different. Traditional couplings have to be balanced and can only run at angles of 8° or less otherwise you get wear in the bearings within the propeller shaft of the universal joint. The bearing races will start to wear on the outside which means the ball bearings will become loose and that creates vibration and with continual wear the ball bearings will fail. Use our twin spring design, flexible with the ability to handle high torque and high speed, with no internal components to replace.

Industrial power transmission couplings

Lovejoy C-226 – TSC300 3/4″ (SOX NBR only)

$190.00

Lovejoy C226 jaw coupling replacement by the TSC300 300 ft lbs replacement for Jaw couplings in any industrial power transmission application Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard jaw coupling . Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings - Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. No bearings to grease or replace No worn spider or inserts to replace Flexible as a universal joint Torsionally rigid for high speed applications One piece design Replaces KTR                          SIT                              Huco Altra                         Belden                         Tsubaki R+W                         Lovejoy                       TB Woods Guardian Couplings  Ruland                        Helical Boston Gear

Industrial power transmission couplings

Lovejoy D-7-TSC300 Industrial 3/4″

$190.00

Lovejoy D-7 3/4" universal joint.

Replace with TSC300 300 ft lbs replacement for mechanical power transmission couplings and universal joint in any industrial power transmission application. Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard coupling and universal joint has not. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings. Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. No bearings to grease or replace. Flexible as a needle bearing universal joint. Torsionally rigid for high speed applications. One piece design. Replaces. Spicer                         KTR                          SIT. Huco                           Altra                         Belden. Tsubaki                       R+W                         Lovejoy. TB Woods                  Guardian Couplings  Ruland. Helical                        McMaster Carr          Boston Gear. Neapco                      Moog                          SKF.

Industrial power transmission couplings

Lovejoy DD-7-TSC300 3/4″

$190.00

Lovejoy DD-7 universal joint with TSC300 300 ft lbs replacement for mechanical power transmission couplings and universal joint in any industrial power transmission application

Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard coupling and uni joints has not. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings. Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. No bearings to grease or replace. Flexible as a universal joint. Torsionally rigid for high speed applications. One piece design. Replaces Spicer                         KTR                          SIT. Huco                           Altra                         Belden. Tsubaki                       R+W                         Lovejoy. TB Woods                  Guardian Couplings  Ruland. Helical                        McMaster Carr          Boston Gear. Neapco                      Moog                          SKF.

Industrial power transmission couplings

Lovejoy L-150 – TSC300 1 1/2″ Jaw coupling replacement

$190.00

Lovejoy L-150 1 1/2" jaw coupling replacement by the TSC300 300 ft lbs replacement for Jaw couplings in any industrial power transmission application.

Couplings in an industrial flexible shaft coupling setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard jaw coupling. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings - Motion control couplings like elastomeric type couplings and the universal joint. No worn spider or inserts to replace. Twin Springs absorbs vibration. Flexible as a universal joint. Torsionally rigid for high speed applications. One piece design. Replaces. KTR, SIT, Altra Motion, Belden, R+W, Lovejoy, TB Woods, Guardian Couplings, Ruland, Rexnord, SKF, Boston Gear.

Industrial power transmission couplings

Lovejoy L-150 – TSC300 1 1/4″ Jaw coupling replacement

$190.00

Lovejoy L-150 1 1/4" jaw coupling replacement by the TSC300 300 ft lbs replacement for Jaw couplings in any industrial power transmission application.

Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard jaw coupling. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings - Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. No worn spider or inserts to replace. Flexible as a universal joint. Torsionally rigid for high speed applications. One piece design. Replaces KTR, SIT, Altra Motion, Belden, Lovejoy, TB Woods, Guardian Couplings, Ruland, Rexnord, SKF, Boston Gear.

$190.00

Lovejoy L-150 1" jaw coupling replacement by the TSC300 300 ft lbs replacement for Jaw couplings in any industrial power transmission application.

Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard jaw coupling. Twin Spring Coupling offers something different. Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings - Motion control couplings like beam, bellows, jaw, elastomeric type couplings and the universal joint. No worn spider or inserts to replace. Flexible as a universal joint. Torsionally rigid for high speed applications. One piece design. Replaces. KTR, SIT, Altra Motion, Belden, Lovejoy, TB Woods, Guardian Couplings, Ruland, Rexnord, SKF, Boston Gear.