Showing 1–12 of 68 results

Twin Spring coupling replaces all mechanical power transmission coupling units, in all kind of industrial applications.

Industrial flexible couplings are broken into two sections, low/zero backlash with 0-2 degree misalignment and anything over that. That includes universal joints, beam, oldham and elastomeric couplings.

Industrial couplings normally run at higher speeds but require less torque capability as high speed and high flexibility can not be combined, until now.

Jaw type couplings are well used as they are a fail safe coupling, that means if the spider insert fails the jaws will clamp together keeping the coupling running but vibration issues will mean it will need to be repairing as soon as possible otherwise equipment damage is probable. Jaw type coupling while widely used can only run at 1-2 degree out of alignment so it limits some of its uses.

Beam Coupling allows for the same angle of misalignment (max 2 degrees) but still with only minimal torque capability, its design means it can be used in minimal/zero backlash applications (motors etc) but it doesn’t handle vibration well and this leads to potential equipment damage.

Bellows coupling – Another industrial coupling that allows for a slight increase in misalignment (max 4 degrees) but its also doesn’t handle vibration well and has minimal torque capabilities.

Elastomeric couplings – While also used in industrial applications like pumps and food processing, they traditionally are used in higher HP applications. It is designed to be used over a few degrees out of alignment also. At Twin Spring because we don’t use bearings our couplings are more flexible than standard industrial couplings, the twin spring design also means increased torsional stiffness required for zero/low backlash applications. Adding the spring design absorbs vibration makes it a excellent replacement for beam, bellows, jaw type couplings.

The other sector of couplings are universal joints, and they still have the same issues they have used in any other application but with additional issues in the industrial sector.

The bearings still need to be constantly greased or the ball bearings inside them will seize due to the increased heat and need to be replaced (potentially cracking the yoke at the same time)

Speed also is an issue for universal joints, high speed also puts increased workload on the bearings, meaning even if greased constantly, they will wear out and need replacing.

Misalignment – While universal joints are used in industrial applications because they are able to be used in misalignment angles larger than other industrial couplings, this still means the bearings are put under increased stress and wear out sooner, like when used in other industries, the technology doesnt allow for the bearings to be used in high misalignment angles.

We do things differently mainly because our Twin Spring Couplings don’t have bearings so the replacement factor does not apply to our flexible couplings.

This also means MRO inventory of couplings is reduced because we have 1 coupling unit that can do the job of a number of different couplings.

Reduced maintenance for both servo and universal joints saves money also and when you add unplanned maintenance (coupling failure) that can add up to not only lost hours but sometimes days if components like yokes or spider inserts are not available.

Check which of our 3 models is right for you.

Twin Spring Coupling – A new flexible power transmission coupling without the downside of traditional couplings

Industrial power transmission couplings

Lovejoy D-10B – TSC500 3/4″

$250.00

Lovejoy D-10B universal Joint, replace today with a Twin Spring Coupling TSC500. 3/4" input/output shaft sizing. Flexible to 35°. High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial universal joints

Lovejoy D-5B – TSC150 1/2″

$150.00

Lovejoy D5B  universal joint couplings, replace today with a Twin Spring Coupling TSC150.

Flexible to 35°. High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy D-6B – TSC150 1/2″

$150.00

Lovejoy D-6B universal Joint, replace today with a Twin Spring Coupling TSC150.

Flexible to 25°. High Speed Up to 7000 RPM. No inserts - No maintenance. One piece design - No broken hubs, worn friction bearings or greasing.  

Industrial power transmission couplings

Lovejoy D-6B – TSC150 3/4″

$220.00

Lovejoy D-6B universal Joint, replace today with a Twin Spring Coupling TSC150.

3/4" Input/Output shaft sizing. Flexible to 25°. High Speed Up to 7000 RPM. No inserts - No maintenance, no replacing parts. One piece design - No broken hubs or worn friction bearing.  

Industrial power transmission couplings

Lovejoy D-8B – TSC300 3/4″

$220.00

Lovejoy D-8B universal Joint, replace today with a Twin Spring Coupling TSC300.

3/4" input/Output shaft sizing. Flexible to 45°. High Speed - 7000 RPM. One piece design - No broken hubs or worn block and pin.  

Industrial power transmission couplings

Lovejoy D-8B – TSC500 1/2″

$220.00

Lovejoy D-8B universal Joint, replace today with a Twin Spring Coupling TSC500.

1/2" Input/Output shaft sizing. Flexible to 35°. High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn bearings.  

Industrial power transmission couplings

Lovejoy L-070 – TSC150 1/2″ Replace it now

$150.00

Lovejoy L070 jaw couplings, replace today with a Twin Spring Coupling TSC150.

Flexible to 15°. High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy L-075 – TSC150 1/2″

$150.00

Lovejoy L-075 jaw couplings, replace today with a Twin Spring Coupling TSC150.

Flexible to 15° High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy L-090 – TSC150 1/2″

$150.00

Lovejoy L-090 jaw couplings, replace today with a Twin Spring Coupling TSC150.

Flexible to 15°. High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy L-095 – TSC150 1/2″

$150.00

Lovejoy L-095 jaw couplings, replace today with a Twin Spring Coupling TSC150.

Flexible to 25°. High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy L-095 – TSC150 3/4″

$150.00

Lovejoy L-095 jaw couplings, replace today with a Twin Spring Coupling TSC150.

3/4" Input/Output shaft sizing. Flexible to 15°. High Speed. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.  

Industrial power transmission couplings

Lovejoy L-099 – TSC150 1 1/4″ Jaw coupling replacement

$190.00

Lovejoy L-099 1 1/4" jaw couplings, replace today with a Twin Spring Coupling TSC150.

Flexible to 25°. Dual springs absorb vibration. High Speed Up to 7000 RPM. No inserts - No maintenance. One piece design - No broken hubs or worn spider inserts.