Lovejoy L-110 1″ Buna-N Jaw coupling alternative – the TSC150 coupling.
Replace your L-110 jaw couplings with a maintenance and insert free replacement.
TSC150 1″ Keyway jaw coupling replacement for mechanical power transmission coupling users. Replace your Lovejoy L-110 with a maintenance free, flexible shaft coupling alternative.
Couplings in the industrial sector traditionally are broken into two sectors, the beam/bellows or elastomeric couplings that can only run at angles of 1° or less, as they cannot physically flex beyond that, for Hytrel and Bronze spider inserts its only 1/2°.
Lovejoy L-110 Jaw couplings are a 3 piece elastomeric coupling, an input and output hub and a spider insert, the insert can be made up of 3 different materials SOX – (NBR/Buna-N/Nitrile rubber), Urethane, Hytrel and Bronze.
Each insert gets progressively stiffer and less able to absorb vibration so the angular misalignment becomes smaller with each insert.
The other power transmission couplings are the two types of universal joints which can normally only run at 4° otherwise prematurely wearing the needle bearings or friction bearings within the propeller shaft of the universal joint.
Both types of bearings will start to wear causing them to become loose and that creates vibration and with continual wear the joint will fail.
The both kinds of bearings need also to be constantly greased otherwise the bearings will not have any lubrication, and with them running at high speed the needles will seize in their tracks again leading to bearing failure.
Jaw couplings the spiders wear after use of 1-2° and yokes can crack.
Twin Spring Coupling can run up to 25° without needing to be lubrication, and at low angles of misalignment and comparable high speeds to traditional industrial couplings.
Bearings being very precise instruments also need to be contained to ensure infiltration by any foreign contaminants, as things like water, mud, dust or dirt will again cause the ball bearings to seize in their tracks and this means bearing failure.
Being used at high speed for long periods of time produces heat and that can cause the ball bearings to seize inside the bearings leading to premature failure.
The other downside to a universal joint are the yokes which the bearings are contained in, the coupling piece of the yokes are quite tough but the section that contains the bearings not so much as they have to hold the bearings.
This is a weak point as the bearings are usually less than 2″ across so the machining to contain the bearings is a lot smaller than the rest of the yoke, which means the likely of them cracking is that much higher.
Cracking leads to catastrophic failure and replacement of both the yoke and universal joint is assured. This makes it an expensive repair as with the price of the yoke and universal joint, it is usually cheaper just to replace everything, both yokes and the propeller joint.
Lovejoy L-110 how the TSC150 outperforms it.
Twin Spring Coupling is different it replaces the entire U joint, yokes, propeller/cross bearings everything, with a simple one piece design.
By being a one piece design also means Twin Spring Coupling wont break like the yokes do in traditional Lovejoy L-110 joints.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM.
Speeds up to 7000 rpm.
Constructed of 4140 Alloy.
Ruland – UJ-HD1000, UJ-HD875, UJ-HS750, JC jaw , MJC jaw.
Lovejoy – L-100, L-110, AL-100, AL-110, AL-150, LC-110, LC-150, CJ28/38, CJ24/32, D-3B, D-4B, LOJ-6B, DD-3B, DD-4B, D-5B, NB-6B, DD-5B, DD-6B, LOJ-8B, Uniflex U100, U125, U137, Saga S13, S Flex Size 6-9, Delta Flex 40/40HT.
Rexnord – Omega E10, E10M, E15, E15M, Omega HDY5, HDY10, Viva V130.
Falk – Wrapflex 10R.
Martin – Quadra Flex Size 8-9 TPR, Size 6 Hytrel., MS150 Buna-N, ML150 Buna-N, ML100 Hytrel.
Guardian Couplings – Guardex M-48, Guardex I-32, LJW L100, LJW L110, LJW L150.
SIT – Trasco ES, Servo Plus 45, GU5P, GU5H.
Belden – UJ-HD1250, UJ- HS1000, UJ-HS1250, UJ-NB1000x500.
KTR – Rotex AL-H 28/38 (92,98, 64), 38-92A, GJL 38 (92A).
Boston Gear – FC25 XFCBB Bronze, FC30 XFCA Poly, FC38 Rubber XFCR, J150B, JS175B, JS200B, UJAS 12-12, UJNL 16-16.
Curtis – CJ644, CJ645.
SKF – FRC 70, SKF Flex 70, 1030TGHSET, UJMA25, UJ338, UJ861, N1000, L600, UJ811, UJ812, UJ880, UJ340, UJ514G, UJ1501, UJ840, UJ838, PHE L100, PHE L110.
Spicer – 5-264X, 5-110X, 5-103X, 5-110X, 5-170X, 5-101X, 5-105X, 5-92X, 24-92X.
Neapco – 1-0170, 1-0675, 1-1475, N1000, L600, 1-0616, 1-0475, 1-0121, 1-0300, 1-0105, 1-0171.
Moog – 338, 838, 340, 341, 514G.
Rockwell – CP101X, 1FR.
For more information on the TSC150 go to https://twinspringcoupling.com/coupling-products/tsc-150/.