Lovejoy C-276 Jaw coupling replacement, the TSC500.
Replace your C-276 jaw coupling with the TSC500 alternative.
Lovejoy C-276 Jaw couplings are a 3 piece elastomeric coupling, an input and output hub and a spider insert, the insert can be made up of 3 different materials SOX – (NBR, Buna-N, Nitrile rubber), Urethane, Hytrel and Bronze.
Each insert gets progressively stiffer and less able to absorb vibration so the angular misalignment becomes smaller with each insert.
The Lovejoy C276 C type jaw coupling with SOX (NBR/Nitrile Rubber) spider insert with the TSC500 model.
Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard coupling and universal joint has not.
Twin Spring Coupling offers something different.
Industrial power transmission is broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these have been serviced by two different couplings – Motion couplings like Lovejoy C276 C Type jaw couplings and the universal joint.
The problem with both couplings are their fundamental design weaknesses, for motion control coupling they can run fast but cannot work at over 1 degrees of misalignment before they start to wear out. With Hytrel and Bronze inserts that number is halved.
The elastomeric insert also compress over time and increase vibration means the spider insert will need to be replaced.
Cracked hubs in the jaw type coupling is also a maintenance issue especially in high torque or stop start applications.
The universal joint is available in two versions, block and pin or friction bearing and needle bearing, they can run at more than 4 degrees but needs constant maintenance to keep the bearings and pivot point greased or they too will wear out quickly.
On top of that they traditionally cannot run over 8 degrees before technical issues like balancing and bearing wear become issues. In a 24/7/365 situation like industrial power transmission that’s going to create interruption and a increased annual maintenance bill.
Lovejoy C-276 SOX replacement the TSC500.
Twin Spring Coupling has no internal components so no annual maintenance and can run at high and low speed as needed.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM.
Flexible up to 25 degrees.
Speeds of up to 7000 rpm.
High Strength 4140 Alloy construction.
Ruland – UJ-HD1250, UJ-HS1125, JC jaw, MJC jaw couplings.
Guardian Couplings – Curved jaw 28/38 Green, 38/45 Red, 42/55 White, 48/60 White , Guardex M-80, Guardex I-65, LJW L150-LJW L225.
TB Woods – Dura Flex WE40, L150, AL150, SS150, L190, L225, L276, G Flex grid coupling 1000T10, 1000T20- 1050 & 1060.
Lovejoy – L110, L150, L190, D-7B, D-8B, NB-8B, NB-10B, DD-7B, LOJ-10B, C226, C276 (SOX), CJ 55/70, 65/75 (92A) 42/55 – 48/60, 55/70 (98/95A), 42/55 – 48/60 (64D), Uniflex U-150R, Saga S18, S Flex 8-12, Delta Flex 50HT/60.
Belden –UJ-HD2000, UJ-HD2500, UJ-HS1750, UJ-HS2000, UJ-NB2000x1000, SS-UJ-NB2000x1000.
Martin – Quadra Flex Size 11 Thermo Plastic Rubber (TPR), Size 8 Hytrel, MS150 Hytrel., ML190 Hytrel.
Curtis – CJ648B.
KTR – Rotex AL-H 38/42/48 (42-92A) 48-92A, GJL 42/48/55/65 (48 92-98/55 92-98) (65 -92A).
SKF – FRC110, SKF Flex 70, PHE L150, PHE L190, PHE L225, UJMA40, 2200, UJ344AG, UJ814, UJ815.
Boston Gear – FC45 XFCA Poly, UJ-J200B, UJAS 16-16, UJNL 24-24.
Rexnord – Omega E30, E30M, E40, E40M, Omega HDY30, Viva V190, V215, Falk Wrapflex 30R.
SIT – GU7P, GU7E, GU7H, Trasco ES 75 red and green.
Spicer – 5-3214X, 5-3235X, 5-554X, 5-129X, 1240.
Neapco – 1-1875, 1-2075, 2200, 1-0005, 2-2421.
Moog – 344, 880, 882, 814, 1300.
Rockwell – L14N.
Weasler – 200-8474, 200-1400, 14 series, 14R, 200-1875, 200-7676, 200-6580, 3010-6606-00, 3009-7606-00, 3009-6406-00, AW21 series, AB4 Series.
For more information on the TSC500 go to https://twinspringcoupling.com/coupling-products/tsc-500/.