Lovejoy C-226 SOX, Buna-N jaw coupling alternative, the TSC300 coupling.
TSC300 T6061 T6 Aluminum jaw coupling alternative, replace your Lovejoy C226.
Couplings in the industrial sector traditionally are broken into two sectors, jaw couplings that can only run at angles of 1° or less otherwise they wear out, as they cannot physically flex beyond that, normally they run at 1/2°. The other are universal joints, both block and pin and needle bearing.
Lovejoy C-226 Jaw couplings are a 3 piece elastomeric coupling, an input and output hub and a spider insert, the insert can be made up of 3 different materials SOX – (NBR, Buna-N),Urethane, Hytrel and Bronze.
Each insert gets progressively stiffer and less able to absorb vibration so the angular misalignment becomes smaller with each insert.
Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard jaw coupling.
Twin Spring Coupling offers something different.
Industrial power transmission couplings are broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment. Traditionally these two needs have been service by two different couplings.
1. Motion control couplings like Lovejoy C-226 jaw type couplings.
2. Universal joints.
The problem with both couplings are their fundamental design weaknesses, for motion control coupling they can run fast but cannot work at over 1° of misalignment before they start to wear out.
The universal joint can run at more than 4 degrees but needs constant maintenance to keep the bearings (both needle and friction bearing) greased or they too will wear out quickly.
On top of that they traditionally cannot run over 8 degrees before technical issues like balancing and bearing wear become issues. In a 24/7/365 situation like industrial power transmission that’s going to create interruption and a increased annual maintenance bill.
TSC300 how it’s different to the Lovejoy C-226.
The one piece design means no greasing, no replacing components just a annual checkup, vital in industrial 24/7 applications.
Twin Spring Coupling (TSC) 300 has no internal components so no need to maintain and replace spider inserts and can run at high and low speed as needed.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM. Available in Imperial or metric.
Flexible up to 45 degrees.
Speeds of up to 7000 rpm.
Constructed of T6061 Aluminum.
Ruland – UJ-HD1000, UJ-HD1125, UJ-HS875, JC jaw, MJC jaw couplings.
Guardian Couplings – Curved jaw 28/38 Red & Green, 38/45 White, 42/55 Blue, 48/60 Blue, Guardex M-65, Guardex I-45, LJW L110, LJW L150, LJW L190.
TB Woods – Dura Flex WE20, WE30, L Jaw L-100, AL-100, SS-100, L-110, AL-110,SS-110, L-150, AL-150, SS-150, L-190, G Flex grid coupling 1000T10 & 1000T20 -1040.
Belden – UJ-HD1500, UJ-HS1500, UJ-HD1750, UJ-HS1500, UJ-HS1750, UJ-NB1500x750, SS-UJ-NB1500x750.
Curtis – CJ646B, CJ647B.
Rexnord – Omega E15, E15M, E20, E20M, Omega HDY15, HDY 20, Viva V150, V190, Falk Wrapflex 20R.
SIT – GU6P, GU6H, 65 red and green.
Boston Gear – FC30 XFCBB Bronze, FC38 XFCA Poly, FC45 Rubber XFCR, UJ-J175B, JS250B, JS300B, UJAS 16-16, UJNL 20-20.
KTR – Rotex AL-H 38,42,45 and GJL 38,42,45 (92A and 98A).
Spicer – 5-443X, 5-3215X, 5-3233X, 5-3232X, 5-736X, 5-554X, 5-248X, 5-242X.
Neapco – 1200, 1-1275, 1800, 1-0221, 1-1001, 1-0443, 2-0456, 2000.
Moog – 237, 240, 437, 437G, 436, 466, 995.
Rockwell – CP456X, L12N, CP248X.
For more information on the TSC300 go to https://twinspringcoupling.com/coupling-products/tsc-300/.